Patents 5584149 - 5584403

 

 

Patent 5584149: Wall and molding protector for carpet installation
(STATIC STRUCTURES (E.G., BUILDINGS) : FRANGIBLE SECTION OR MEANS : Covering continuation overlaps edge)

Patent 5584150: Angle iron cover
(STATIC STRUCTURES (E.G., BUILDINGS) : FRAMING TO RECEIVE DOOR, DOORJAMB, OR WINDOW SASH : Lintel : Integral tread and riser)

Patent 5584151: Earthquake, wind resistant and fire resistant pre-fabricated building panels and structures formed therefrom
(STATIC STRUCTURES (E.G., BUILDINGS) : FOOTING OR FOUNDATION TYPE : For a wall : Of block (e.g., masonry) type : Longitudinally spaced discrete anchor portions)

Patent 5584152: Joint seal retaining element
(STATIC STRUCTURES (E.G., BUILDINGS) : RELATIVELY YIELDABLE PREFORMED SEPARATOR (I.E., EXPANSION JOINT) : Exposed separator between (1) set or cured concrete, (2) metal, wood, plastic, etc., or (3) prefabricated components : With embedded anchor means : Base is preformed module or panel)

Patent 5584153: Composite roof system with an improved anchoring mechanism
(STATIC STRUCTURES (E.G., BUILDINGS) : DISPARATE SHEET LAMINA BETWEEN EXPOSED SURFACES OF WALL, FLOOR, OR ROOF (E.G., VAPOR BARRIER, WATERPROOFING MEMBRANE) : Tie crossing dividing lamina : Insulation defines air enclosing cell or compartment)

Patent 5584154: Closure and sealing joint for incorporation in such a closure
(STATIC STRUCTURES (E.G., BUILDINGS) : SECTIONED IMPERFORATE FACING WITHIN PERPHERAL FRAME; E.G., PLURAL PANEL DOOR : Intersecting separators within frame : With transverse filament)

Patent 5584155: Roof plate for longitudinal roofing
(STATIC STRUCTURES (E.G., BUILDINGS) : LAPPED MULTIPLANAR SURFACING; E.G., SHINGLE TYPE : Interfitted sections : Face-to-face tongue and groove; e.g., dado : Plural opposed flanges : With terminal flange extending beyond joint)

Patent 5584156: Modular structural framing system
(STATIC STRUCTURES (E.G., BUILDINGS) : OPENWORK; E.G., TRUSS, TRELLIS, GRILLE, SCREEN, FRAME, OR REBAR CHAIR : Three-dimensional space-defining : Framework : Scaffolding)

Patent 5584157: Structure of a door frame
(STATIC STRUCTURES (E.G., BUILDINGS) : OPENWORK; E.G., TRUSS, TRELLIS, GRILLE, SCREEN, FRAME, OR REBAR CHAIR : Outside corner or peripherally bordered (i.e., framing, etc.) : Portal frame or closure frame : For door : Inclined struts or ties meeting at intermediate runner)

Patent 5584158: Architectural support
(STATIC STRUCTURES (E.G., BUILDINGS) : SHAFT (I.E., ELONGATED RIGID STRUCTURE) : Baluster type (e.g., newel post, spindle, etc.) : Having resilient-type anchor)

Patent 5584159: Masonry arch support apparatus and method
(STATIC STRUCTURES (E.G., BUILDINGS) : MACHINE OR IMPLEMENT : Masonry : Bricklaying machine : Sheathing)

Patent 5584160: Device for feeding articles to a packaging line that inserts the articles into respective containers
(PACKAGE MAKING : DEPOSITING ARTICLES AND ARRANGING MATERIAL IN PREFORMED RECEPTACLES : With movement of receptacle to or from filling station : With means to supply successive receptacles : Contents or receptacle transfer between conveyers : Rotary turret or carrier)

Patent 5584161: Capping unit for automatically assembling pump-operated spray cap bottles
(PACKAGE MAKING : CLOSING PACKAGES AND FILLED RECEPTACLES : Separate closure applying : Screw or lug closure applying means : With wiper or leveler means)

Patent 5584162: Method of wrapping a floral product
(PACKAGE MAKING : METHODS : Applying a partial cover : Banding :)

Patent 5584163: Applicator mitt
(PACKAGE MAKING : METHODS : Forming a cover adjunct or application of a cover adjunct to a cover : Including evacuating)

Patent 5584164: Needle shield device for surgical packages
(PACKAGE MAKING : METHODS : With contents treating : Winding : Constricting closure by binding)

Patent 5584165: Method of filling and insert for a container
(PACKAGE MAKING : METHODS : With contents treating : Vacuum or gas treating : Constricting closure by binding)

Patent 5584166: Flexible package end sealing and cutting method and apparatus
(PACKAGE MAKING : METHODS : Enclosing contents within progressively formed web means : Vertically formed, filled, and sealed tubular package : Before association with cover material)

Patent 5584167: Working vehicle
(HARVESTERS : MOTORIZED HARVESTER : With selective control of drive means : By controlling plural drive trains : For individual harvesting unit)

Patent 5584168: Ring and traveller system for spinning and twisting frames
(TEXTILES: SPINNING, TWISTING, AND TWINING : APPARATUS AND PROCESSES : Elements : Rings and travelers : Ring and raceway type)

Patent 5584169: Steel cord
(TEXTILES: SPINNING, TWISTING, AND TWINING : STRAND STRUCTURE : Covered or wrapped : Wire wrapped :)

Patent 5584170: Method and apparatus for driving an open-end spinning rotor during automatic piecing
(TEXTILES: SPINNING, TWISTING, AND TWINING : APPARATUS AND PROCESSES : Piecing up : On open-end machine : With reverse twist controller)

Patent 5584171: Gas turbine control method and apparatus
(POWER PLANTS : COMBUSTION PRODUCTS USED AS MOTIVE FLUID : Process : Having power output control : Exhaust actuated air aspirator)

Patent 5584172: Nitrogen oxide removal control apparatus
(POWER PLANTS : COMBUSTION PRODUCTS USED AS MOTIVE FLUID : With exhaust treatment : Solid fuel containing oxidizer)

Patent 5584173: Nozzle seal assembly with removable baseplate
(POWER PLANTS : COMBUSTION PRODUCTS USED AS MOTIVE FLUID : Having mounting or supporting structure : For motor : Water or steam)

Patent 5584174: Power turbine flywheel assembly for a dual shaft turbine engine
(POWER PLANTS : COMBUSTION PRODUCTS USED AS MOTIVE FLUID : Multiple fluid-operated motors : Re-expansion : Solid propellant charge initiates starting (e.g., cartridge starter, etc.))

Patent 5584175: Heating means for catalyst unit
(POWER PLANTS : INTERNAL COMBUSTION ENGINE WITH TREATMENT OR HANDLING OF EXHAUST GAS : Methods : Anti-pollution : Motive fluid is vaporized liquid)

Patent 5584176: Engine control to achieve rapid catalyst warm-up
(POWER PLANTS : INTERNAL COMBUSTION ENGINE WITH TREATMENT OR HANDLING OF EXHAUST GAS : Methods : Anti-pollution : Motive fluid is vaporized liquid)

Patent 5584177: Adsorber temperature-estimating device for internal combustion engines and exhaust gas-purifying system using same
(POWER PLANTS : INTERNAL COMBUSTION ENGINE WITH TREATMENT OR HANDLING OF EXHAUST GAS : By means producing a chemical reaction of a component of the exhaust gas : Automatic or timed reactor purge or heat-up in engine starting operation : Motive fluid is vaporized liquid)

Patent 5584178: Exhaust gas combustor
(POWER PLANTS : INTERNAL COMBUSTION ENGINE WITH TREATMENT OR HANDLING OF EXHAUST GAS : By means producing a chemical reaction of a component of the exhaust gas : Having heater, igniter, or fuel supply for reactor : Catalyst in engine manifold or at exhaust port)

Patent 5584179: Pumping machine and generator system utilizing the same
(POWER PLANTS : PRESSURE FLUID SOURCE AND MOTOR : Cyclically operable reciprocating or oscillating motor or output stroke device : Pneumatic motor : Toroidal impeller and turbine)

Patent 5584180: Hydraulic device for operating at least one linearly movable component
(POWER PLANTS : PRESSURE FLUID SOURCE AND MOTOR : With control means for structure storing work driving energy (e.g., accumulator, etc.) : Having pump device)

Patent 5584181: Waste gate structure of a turbocharger
(POWER PLANTS : FLUID MOTOR MEANS DRIVEN BY WASTE HEAT OR BY EXHAUST ENERGY FROM INTERNAL COMBUSTION ENGINE : With supercharging means for engine : Having condition responsive valve controlling engine exhaust flow : With coordinated engine fuel control)

Patent 5584182: Combustion chamber with premixing burner and jet propellent exhaust gas recirculation
(POWER PLANTS : COMBUSTION PRODUCTS USED AS MOTIVE FLUID : Combustion products generator : Having fuel supply system : Fuel and air premixed prior to combustion : Bleed)

Patent 5584183: Thermoelectric heat exchanger
(REFRIGERATION : USING ELECTRICAL OR MAGNETIC EFFECT : Thermoelectric; e.g., peltier effect : Including specific circuitry or heat exchanger material : Beverage dispenser)

Patent 5584184: Superconducting magnet and regenerative refrigerator for the magnet
(REFRIGERATION : GAS COMPRESSION, HEAT REGENERATION AND EXPANSION, E.G., STIRLING CYCLE : Thermoelectric; e.g., peltier effect)

Patent 5584185: Engine powered energy providing assemblies
(REFRIGERATION : PROCESSES : Compressing, condensing and evaporating : Utilizing particular refrigerant and/or sorbent materials)

Patent 5584186: Refrigerant circuit for ice making machine etc.
(REFRIGERATION : AUTOMATIC CONTROL : Refrigeration producer : Bypass, e.g., compressor unloading : Condensor bypass : Sequential)

Patent 5584187: Quick-chill beverage chiller
(REFRIGERATION : SEPARABLE AMBULANT COOLED ENCLOSURE AND POWER OR COOLING SOURCE : Defrosting)

Patent 5584188: Refrigerated beverage trailer
(REFRIGERATION : WITH VEHICLE FEATURE : With vapor compression system)

Patent 5584189: Refrigerated merchandiser
(REFRIGERATION : DISPLAY TYPE : With air controlling or directing means : Including nondisplay storage compartment)

Patent 5584190: Freezer with heated floor and refrigeration system therefor
(REFRIGERATION : STRUCTURAL INSTALLATION : Geographic, e.g., subterranean feature : Spaced elongated air inlet and outlet type, e.g., air curtain)

Patent 5584191: Cool air supply apparatus of refrigerator
(REFRIGERATION : GAS CONTROLLER OR DIRECTOR : Cooled gas directed relative to cooled enclosure : With imperforate partition forming storage compartments : Space cooler units in separate streams)

Patent 5584192: Refrigerated shelf merchandiser
(REFRIGERATION : COOLED ENCLOSURE : Portable receptacle : Cooled by means other than ice (e.g., mechanical, electrical, absorption, cryogenic, etc.) : For beverage receptacle)

Patent 5584193: Absorption-type refrigeration systems and methods
(REFRIGERATION : REFRIGERATION PRODUCER : Sorbent type : Means for discharging impurity from system)

Patent 5584194: Method and apparatus for producing liquid nitrogen
(REFRIGERATION : CRYOGENIC TREATMENT OF GAS OR GAS MIXTURE : Liquefaction : Air : Heat exchange with liquid cryogen)

Patent 5584195: Wrist writing instrument
(JEWELRY : COMBINATION ORNAMENT : With tool, e.g., knife, pen, lens, etc. :)

Patent 5584196: Knitting plied elastic yarn on a full fashion flat bed knitting machine
(TEXTILES: KNITTING : INDEPENDENT-NEEDLE MACHINES : Straight : Preparing for transfer)

Patent 5584197: Knitting method
(TEXTILES: KNITTING : INDEPENDENT-NEEDLE MACHINES : Straight : Multiple-needle bank : Double-ended needle)

Patent 5584198: Apparatus and method for forming metal building panels
(METAL DEFORMING : WITH USE OF CONTROL MEANS ENERGIZED IN RESPONSE TO ACTIVATOR STIMULATED BY CONDITION SENSOR : Metal deforming by use of roller or roller-like tool element : Including plural sensors or sensor responsive to comparison between plural conditions : Sensing work or product (e.g., by X-ray) : Sensing work or product (e.g., by X-ray))

Patent 5584199: Device for measuring an angle in a workpiece
(METAL DEFORMING : WITH USE OF CONTROL MEANS ENERGIZED IN RESPONSE TO ACTIVATOR STIMULATED BY CONDITION SENSOR : Sensing work or product (e.g., by X-ray) : Including plural sensors or sensor responsive to plural conditions : Sensing cross sectional dimension : Sensing thickness)

Patent 5584200: Universal crimping tool locator
(METAL DEFORMING : WITH INDICATION OF CONDITION OR POSITION OF WORK, PRODUCT, OR MACHINE ELEMENT (E.G., BROKEN TOOL ALARM, ETC.) : Including deformation by simple bending : Work stop position : By sensing hydraulic pressure)

Patent 5584201: Elevated temperature metal forming lubrication method
(METAL DEFORMING : WITH CLEANING, DESCALING, OR LUBRICATION OF WORK OR PRODUCT : Lubricating : With particular lubricant : By sensing hydraulic pressure)

Patent 5584202: Method and apparatus for manufacturing internal gear, internal gear structure and reduction mechanism unit having internal gear structure
(METAL DEFORMING : BY USE OF TOOL ACTING DURING RELATIVE ROTATION BETWEEN TOOL AND WORK ABOUT INTERNAL CENTER (E.G., GYRATING OR ROTATING TOOL) : During rotation of work : Using non-cylindrical rotating tool : And cooperating, complementary tool : With cooperating tool rotating in same direction)

Patent 5584203: Rolling mandrel changing device for a plug mill
(METAL DEFORMING : BY USE OF ROLLER OR ROLLER-LIKE TOOL-ELEMENT : With tool inside hollow work : Comprising plug acting on longitudinally moving work : With cooperating allochiral tool-face)

Patent 5584204: Press progressive dies for a metallic gasket
(METAL DEFORMING : WITH CUTTING : By shearing tool-couple : With endless cutting edges (e.g., for punching a hole) : After final metal-deforming operation : Blank detaching)

Patent 5584205: Transport system
(METAL DEFORMING : BY PLURAL TOOL-COUPLES : With means to feed work between plural tool stations : Belt or chain work carrier : Between generally opposed-stroke tools)

Patent 5584206: Electric actuator
(MACHINE ELEMENT OR MECHANISM : ROTARY DRIVEN DEVICE ADJUSTABLE DURING OPERATION RELATIVE TO ITS SUPPORTING STRUCTURE : Reciprocating or oscillating to or from alternating rotary : Unbalanced weight)

Patent 5584207: Integrated drive system
(MACHINE ELEMENT OR MECHANISM : ROTARY DRIVEN DEVICE ADJUSTABLE DURING OPERATION RELATIVE TO ITS SUPPORTING STRUCTURE : Reciprocating or oscillating to or from alternating rotary : Including flexible drive connector (e.g., belt, chain, strand, etc.) : With pulley : Curvilinear rack)

Patent 5584208: Automatic transmission system
(MACHINE ELEMENT OR MECHANISM : GEARING : Interchangeably locked : Plurality of counter shafts : On single driving member)

Patent 5584209: Electric circuit for manual shifting of an electronically-controlled automatic transmission system
(MACHINE ELEMENT OR MECHANISM : GEARING : Interchangeably locked : Control mechanism : Preselector)

Patent 5584210: Hand brake lever assembly
(MACHINE ELEMENT OR MECHANISM : CONTROL LEVER AND LINKAGE SYSTEMS : Multiple controlling elements for single controlled element : Steering and controls assemblies : Reciprocating control elements : Handle bar type : Flexible control element : Resiliently biased control lever)

Patent 5584211: Steering column assembly, especially for a motor vehicle
(MACHINE ELEMENT OR MECHANISM : CONTROL LEVER AND LINKAGE SYSTEMS : Hand operated : Steering posts : Levers)

Patent 5584212: Cable end fitting with simplified assembly
(MACHINE ELEMENT OR MECHANISM : CONTROL LEVER AND LINKAGE SYSTEMS : Hand operated : Flexible transmitter (e.g., Bowden cable) : Specific cable connector or guide : Single rotatable lever (e.g., for bicycle brake or derailleur))

Patent 5584213: Rotatable grip for derailleur type bicycle gear shifting system
(MACHINE ELEMENT OR MECHANISM : CONTROL LEVER AND LINKAGE SYSTEMS : Variable output force : Handles : Handle bars : Handholds and grips : Continuous)

Patent 5584214: Transmission having a static, hydraulic continuously-variable-speed transmission mechanism
(MACHINE ELEMENT OR MECHANISM : GEARING : With fluid drive : With one or more controllers for gearing, fluid drive, or clutch : Spur)

Patent 5584215: Tire cutting apparatus
(TURNING : SEVERING OR CUT-OFF : Infeed means : With means to support and/or rotate work : For window shade)

Patent 5584216: Tool with breakage sensor and method
(CUTTING : WITH RANDOMLY ACTUATED STOPPING MEANS : Responsive to tool detector or work-feed-means detector : Responsive to tool characteristic : Nonrectilinear cutting)

Patent 5584217: Precison adjustable table for radial arm saw
(CUTTING : WITH WORK IMMOBILIZER : Work-stop abutment : With scale or indicator : Tool or tool support on movable clamp jaw)

Patent 5584218: Cutter having a pair of cooperating flexible blades providing a pair of moving point cutting edges
(CUTTING : MEANS TO DRIVE OR TO GUIDE TOOL : With simple rectilinear reciprocating motion only : Progressively cutting : Including details of guide for tool or tool support)

Patent 5584219: Release device for multi glazing air cushion
(CUTTING : TOOL CARRIER OR GUIDE AFFIXED TO WORK DURING CUTTING : Entirely work supported : Tool opposing pusher)

Patent 5584220: Angle attachment tool
(TOOLS : WRENCH, SCREWDRIVER, OR DRIVER THEREFOR : Machine : Gear-operated : Right angle drive : Flexible shaft)

Patent 5584221: Screw injector magazine
(TOOLS : WRENCH, SCREWDRIVER, OR DRIVER THEREFOR : Machine : With feed or magazine means : Including driven, flexible, work supporting strip : Flexible shaft)

Patent 5584222: Method for charging bore-holes with explosive
(AMMUNITION AND EXPLOSIVE-CHARGE MAKING : LOADING FIREWORKS AND BURSTING CHARGES : Placing, tamping, or priming charge in blast hole : Primer, primer anvil, percussion cap making)

Patent 5584223: Yarn tensioning device for textile weaving machines
(TEXTILES: BRAIDING, NETTING, AND LACE MAKING : : Shuttles, carriages and/or threading and loading or unloading devices : Braiding carriers : With strand tensioning means : Let offs :)

Patent 5584224: Hydraulic systems
(MOTORS: EXPANSIBLE CHAMBER TYPE : WORKING MEMBER POSITION FEEDBACK TO MOTIVE FLUID CONTROL : Electrical input and feedback signal means (459) : Rotated part)

Patent 5584225: Hydraulic cylinder, especially a trim and tip cylinder for outboard type boat propeller drive units
(MOTORS: EXPANSIBLE CHAMBER TYPE : WORKING MEMBER POSITION RESPONSIVE MOTIVE FLUID CONTROL : Exhaust control : Throttling (e.g., cushioning) : One movable part unitary with working member)

Patent 5584226: Hydraulically supported power steering system
(MOTORS: EXPANSIBLE CHAMBER TYPE : WITH MOTIVE FLUID VALVE : Relatively movable serial valves : Including motive fluid pressure or flow responsive valve (468) : Between working chamber and inlet and exhaust valve : Working member covers exhaust port (409))

Patent 5584227: Variable priority device
(MOTORS: EXPANSIBLE CHAMBER TYPE : PLURAL RELATIVELY MOVABLE OR RIGIDLY INTERCONNECTED WORKING MEMBERS : With means for proportioning motive fluid supply to plural motors : Control means includes separate control valves for each working member)

Patent 5584228: Slanting plate arrangement in a hydraulic axial piston machine
(EXPANSIBLE CHAMBER DEVICES : RELATIVELY MOVABLE WORKING MEMBERS : Interconnected with common rotatable shaft : Shaft axis parallel to axes of working members (70) : Single crankshaft offset from center of work chamber)

Patent 5584229: Reduced temperature coffee brewer
(FOODS AND BEVERAGES: APPARATUS : BEVERAGE : Infusors : Automatic control : With agitating means)

Patent 5584230: Bread making apparatus
(FOODS AND BEVERAGES: APPARATUS : COOKING : Automatic control : Of heat and material : Separating discharge)

Patent 5584231: Multi-purpose food toaster/warmer
(FOODS AND BEVERAGES: APPARATUS : COOKING : Automatic control : Of heat or heater : By time : Relative movement, toast and support)

Patent 5584232: Portable oven
(FOODS AND BEVERAGES: APPARATUS : COOKING : Convertible : Of heat and material)

Patent 5584233: Automatic bread-making apparatus
(FOODS AND BEVERAGES: APPARATUS : COOKING : With stirring : Condensing or self basting)

Patent 5584234: Cooking appliance, such as a fryer for example, having a condensation device for cooking vapours
(FOODS AND BEVERAGES: APPARATUS : COOKING : Boiler or deep fat fryer type : Hanged or separable grids)

Patent 5584235: Food steamer flavoring support
(FOODS AND BEVERAGES: APPARATUS : COOKING : Boiler or deep fat fryer type : Elevated, steaming or draining position : Rim engaging support : Fluid current)

Patent 5584236: Fat removal draining system and method
(FOODS AND BEVERAGES: APPARATUS : COOKING : Imperforate sheet or griddle type : Drip segregating, receiving or directing : Pivoted section)

Patent 5584237: Heated air-circulating oven
(FOODS AND BEVERAGES: APPARATUS : COOKING : With conveyor or movably supported : Conveyor : Including pie rim clamp or guard)

Patent 5584238: Fat/stock separator
(FOODS AND BEVERAGES: APPARATUS : MEANS TO TREAT FOOD : By isolating a fluid constituent : By safety means)

Patent 5584239: Crusher for metal cans
(PRESSES : METHODS : Binder retaining material holders)

Patent 5584240: Embossing apparatus for inorganic board and method of embossing thereby
(PRINTING : EMBOSSING OR PENETRATING : Processes : Hot)

Patent 5584241: Printing switching apparatus for sheet-fed rotary press with reversing mechanism
(PRINTING : ROLLING CONTACT MACHINES : Rotary : Perfecting : Reversing : Feeding or delivering)

Patent 5584242: Clamp assembly for lithographic plates
(PRINTING : FLEXIBLE-SHEET-SECURING DEVICES : Work in rolling contact with printing plate)

Patent 5584243: Conversion kit for a gravure printing unit
(PRINTING : ASSEMBLY OR DISASSEMBLY FEATURES : Anti-offset material application)

Patent 5584244: Method for starting the production run on a sheet-processing printing machine
(PRINTING : PROCESSES : Condition responsive : With cleaning composition)

Patent 5584245: Washer unit control system
(PRINTING : PROCESSES : Condition responsive : With cleaning composition)

Patent 5584246: Process and apparatus for printing on flat individual articles
(PRINTING : PROCESSES : Position or alignment : With cleaning composition)

Patent 5584247: Rail clip applicator
(RAILWAYS : TRACK LAYERS :)

Patent 5584248: Split tool mechanical vibrator
(RAILWAYS : TRACK LAYERS : Tamper : Car mounted :)

Patent 5584249: Shackle snubber for carcass carriers
(RAILWAYS : CAR STOPS : Special track : Horizontal thrust only)

Patent 5584250: Center clamp assembly for frame brace rail truck
(RAILWAY ROLLING STOCK : TRUCKS : Bogie : Articulated)

Patent 5584251: Railway car outlet gate assembly with automatic lock
(RAILWAY ROLLING STOCK : SPECIAL CAR BODIES : Dumping : Door actuators : Rack and pinion : Terminal hook)

Patent 5584252: Railway freight car
(RAILWAY ROLLING STOCK : CAR FRAMING AND STRUCTURE : Freight : Metal sheathing : Drop end door)

Patent 5584253: Television supported shelf
(HORIZONTALLY SUPPORTED PLANAR SURFACES : WITH STRUCTURAL INSTALLATION : Formed from support)

Patent 5584254: Collapsible work bench apparatus
(HORIZONTALLY SUPPORTED PLANAR SURFACES : FOLDING : Mutually pivoted crossed legs support surface : Sliding pivot connects surface and support)

Patent 5584255: Method and apparatus for gasifying organic materials and vitrifying residual ash
(FURNACES : REFUSE INCINERATOR : With boiler)

Patent 5584256: Tool for placement of amassed granular fertilizer in soil
(PLANTING : DIBBLING : Manually-operated implements : Revolving-dibble-carrier implements)

Patent 5584257: Under thread supply apparatus
(SEWING : ELEMENTS : Bobbin winding : Electrically operated or controlled)

Patent 5584258: Semi-automatic pocket and pocket flap setter
(SEWING : SPECIAL MACHINES : Pattern controlled or programmed : Positionable work carrier under electronic pattern or program control : For workpiece edge sewing : Frames)

Patent 5584259: Lengthwise adjustable forked boom for surfboards
(SHIPS : SPARS : Gaffs, booms, etc. : Trusses and parrels)

Patent 5584260: Tube attachment device for inflatable boats
(SHIPS : BOATS, BOAT COMPONENT OR ATTACHMENT : Inflatable : Flat bottom)

Patent 5584261: Non-conductive dairy parlor entry gate
(ANIMAL HUSBANDRY : MILKERS : Milking station arrangements; e.g., parlors : Aquarium structural elements and assembly)

Patent 5584262: Pulsation control having pulse width modulating driving circuit
(ANIMAL HUSBANDRY : MILKERS : With fluid compression : With electromagnetic control : Transparent inspection means and/or flow line section)

Patent 5584263: Pet food dish elevating assembly
(ANIMAL HUSBANDRY : FEEDING DEVICE : With watering devices : Trip requiring reset)

Patent 5584264: Method and apparatus for smelt spout casting installation
(LIQUID HEATERS AND VAPORIZERS : WATER TUBE : Vertical)

Patent 5584265: Method for reducing NO.sub.x in the exhaust streams of internal combustion engines
(INTERNAL-COMBUSTION ENGINES : MISCELLANEOUS : Fuels, lubricants and additives :)

Patent 5584266: Fuel control for multi-cylinder engine
(INTERNAL-COMBUSTION ENGINES : TWO-CYCLE : Pump and cylinder inclined : Crankcase : Fuel to crankcase : Multiple swash plate drive)

Patent 5584267: Latchable rocker arm mounting
(INTERNAL-COMBUSTION ENGINES : POPPET VALVE OPERATING MECHANISM : Rocker : Housings)

Patent 5584268: Low inertia rocker arm with lash adjuster and engine valve
(INTERNAL-COMBUSTION ENGINES : POPPET VALVE OPERATING MECHANISM : Rocker : Lash adjustment : Hydraulic : Controlling vacuum actuator)

Patent 5584269: Engine block heater
(INTERNAL-COMBUSTION ENGINES : WITH HEATING MEANS : Manifold material or composition)

Patent 5584270: Intake pipe for an internal combustion engine
(INTERNAL-COMBUSTION ENGINES : INTAKE MANIFOLD : Manifold tuning, balancing or pressure regulating means : With back flow prevention valve : Interconnection between plenums)

Patent 5584271: Valve stem seal
(INTERNAL-COMBUSTION ENGINES : VALVE : Packing : Seal)

Patent 5584272: Method and arrangement for controlling an adjusting device for vehicles
(INTERNAL-COMBUSTION ENGINES : ENGINE SPEED REGULATOR : Open loop condition responsive : Having an electrical device between input and speed regulator : Throttle position lock)

Patent 5584273: Throttle valve actuator with non-linear to linear cam operation
(INTERNAL-COMBUSTION ENGINES : ENGINE SPEED REGULATOR : Open loop condition responsive : Mechanical connection between input and speed regulator : Throttle position lock)

Patent 5584274: Apparatus for controlling operation timing of internal combustion engine
(INTERNAL-COMBUSTION ENGINES : SPARK IGNITION TIMING CONTROL : Electronic control : With fail-safe, backup or malfunction detecting means : Engine shaft rotational position sensor malfunction responsive (e.g., crank shaft, cam shaft) : Liquid fluid governor)

Patent 5584275: Ignition apparatus for internal combustion engine
(INTERNAL-COMBUSTION ENGINES : SPARK IGNITION TIMING CONTROL : Electronic control : With fail-safe, backup or malfunction detecting means : Including spark failure responsive means (e.g., misfire) : Liquid fluid governor)

Patent 5584276: Ignition timing controlling apparatus and method for internal combustion engine with exhaust gas purification catalytic converter
(INTERNAL-COMBUSTION ENGINES : SPARK IGNITION TIMING CONTROL : Electronic control : Closed loop feedback control of spark timing : Including means responsive to the instantaneous change in engine speed (e.g., roughness, unstable combustion, etc.) : Cylinder pressure responsive)

Patent 5584277: Fuel delivery system with wall wetting history and transient control
(INTERNAL-COMBUSTION ENGINES : CHARGE FORMING DEVICE (E.G., POLLUTION CONTROL) : Fuel injection system : Electrically actuated injector : Actuator circuit (e.g., engine condition responsive electronic circuit actuates injector valve) : Having microprocessor : Memory addressed by engine speed or load)

Patent 5584278: System for controlling fuel vapor flow discharged from a fuel tank to a canister
(INTERNAL-COMBUSTION ENGINES : CHARGE FORMING DEVICE (E.G., POLLUTION CONTROL) : Fuel flow regulation between the pump and the charge-forming device : Air or fuel vapor purging system : Environmental condition responsive)

Patent 5584279: Thermally insulated fuel system for motor-vehicle engine
(INTERNAL-COMBUSTION ENGINES : CHARGE FORMING DEVICE (E.G., POLLUTION CONTROL) : Cooling of combustible mixture : Fuel only : Purge valve controlled by engine parameter)

Patent 5584280: Ignition device of capacitor discharge type for internal combustion engine
(INTERNAL-COMBUSTION ENGINES : SPARK IGNITION TIMING CONTROL : Electronic control : With magneto : And capacitor discharge for ignition spark energy : Engine cylinder pressure responsive)

Patent 5584281: Engine control system
(INTERNAL-COMBUSTION ENGINES : CHARGE FORMING DEVICE (E.G., POLLUTION CONTROL) : Including exhaust gas condition responsive means : Combined with engine condition responsive means : Engine load responsive : With resistor/capacitor (RC) timing circuit (e.g., multivibrator))

Patent 5584282: Stabilizers adapted to be connected to a bow
(MECHANICAL GUNS AND PROJECTORS : ELEMENT : For archery projector : Bow handle or attachment thereto : For stabilization thereof : Having cut-off)

Patent 5584283: Cooking fuel container and burner having toroidal shaped burn area and flame
(STOVES AND FURNACES : HOT-AIR FURNACES : Cooking : Combined base and hot closet : Gas : Alcohol : Drawer-elevating)

Patent 5584284: Self-cleaning gas-fueled oven for cooking
(STOVES AND FURNACES : STOVE DOORS AND WINDOWS : Stove mats)

Patent 5584285: Breathing circuit apparatus for a nebulizer
(SURGERY : LIQUID MEDICAMENT ATOMIZER OR SPRAYER : Gas stream aspirating medicament from reservoir : Joint or limb (e.g., foot, elbow, heel, knee, etc.))

Patent 5584286: Integrated breathing system
(SURGERY : RESPIRATORY METHOD OR DEVICE : Pre-pressurized container holding medicament)

Patent 5584287: Safety system for scuba divers including CO detection
(SURGERY : RESPIRATORY METHOD OR DEVICE : Means for indicating improper condition of apparatus : Garment)

Patent 5584288: Multi-stage mouth-to-mouth resuscitator valve
(SURGERY : RESPIRATORY METHOD OR DEVICE : Means using rescuer's breath for supplying respiratory gas to another person : Garment)

Patent 5584289: Breathing apparatus having a flexible manifold connected between a plurality of air cylinders
(SURGERY : RESPIRATORY METHOD OR DEVICE : Means for supplying respiratory gas under positive pressure : Valve, or valve control, structure : Rebreathing bag or bellows)

Patent 5584290: Combined laryngeal mask airway and muscular or neuro-muscular response device
(SURGERY : RESPIRATORY METHOD OR DEVICE : Respiratory gas supply means enters mouth or tracheotomy incision : Breathing passage occluder : Valve for controlling gas flow)

Patent 5584291: Method for recognizing and identifying emergency situations in an anesthesia system by means of a self-organizing map
(SURGERY : DIAGNOSTIC TESTING : Via monitoring a plurality of physiological data, e.g., pulse and blood pressure :)

Patent 5584292: Digital X-ray camera for precision mammographic needle biopsy system
(SURGERY : DIAGNOSTIC TESTING : Sampling nonliquid body material (e.g., bone, muscle tissue, epithelial cells, etc.) : Cutting : Body pierced by tubular cutter or rod-type punch : Body pierced by tubular cutter or rod-type punch)

Patent 5584293: Time-line imaging-plane prescription for MRI
(SURGERY : DIAGNOSTIC TESTING : Detecting nuclear, electromagnetic, or ultrasonic radiation : Magnetic resonance imaging or spectroscopy : Disposable or sterilizable eye contacting structure)

Patent 5584294: Method and apparatus for ultrasonic blood flow display
(SURGERY : DIAGNOSTIC TESTING : Detecting nuclear, electromagnetic, or ultrasonic radiation : Ultrasonic : Plural display mode systems : Having B-scan and Doppler : With means for inserting into a body)

Patent 5584295: System for measuring the period of a quasi-periodic signal
(SURGERY : DIAGNOSTIC TESTING :)

Patent 5584296: Patient sensor for optical cerebral oximeters and the like
(SURGERY : DIAGNOSTIC TESTING : Detecting nuclear, electromagnetic, or ultrasonic radiation : Visible light radiation : Cardiovascular testing : Associated with puncturing instrument)

Patent 5584297: Process and equipment for diagnosing circulation (cerebrovascular) disorders
(SURGERY : DIAGNOSTIC TESTING : Cardiovascular : Simultaneously detecting cardiovascular condition and diverse body condition : Cardiovascular testing)

Patent 5584298: Noninvasive hemodynamic analyzer alterable to a continuous invasive hemodynamic monitor
(SURGERY : DIAGNOSTIC TESTING : Cardiovascular : Measuring pressure in heart or blood vessel : Detecting respiratory condition)

Patent 5584299: Heart pulse wave detecting device using iterative base point detection
(SURGERY : DIAGNOSTIC TESTING : Cardiovascular : Measuring pressure in heart or blood vessel : Force applied against skin to close blood vessel : Electric signal generated by sensing means responsive to pulse or Korotkoff sounds : Pulse-induced pressure fluctuation in occluder generates electric signal : Tool (e.g., ablation, abrasion, cutting))

Patent 5584300: Measurement of lung air capacity
(SURGERY : DIAGNOSTIC TESTING : Respiratory : Heart)

Patent 5584302: Surgical frame pad cover
(BEDS : SUPPORT MEANS FOR DISCRETE PORTION OF USER, USEABLE WITH BED OR SURGICAL SUPPORT : With spaced shield)

Patent 5584303: Therapeutic leg support
(BEDS : SUPPORT MEANS FOR DISCRETE PORTION OF USER, USEABLE WITH BED OR SURGICAL SUPPORT : For lower body portions : Including restraining means)

Patent 5584304: Method of inserting an IOL using a forceps inside a folding tube
(SURGERY : MISCELLANEOUS : Methods : Holding strap extending circumferentially of head or neck)

Patent 5584305: Performance meter taking into account trip parameters
(SURGERY : MISCELLANEOUS : Methods : Holding strap extending circumferentially of head or neck)

Patent 5584306: Reconstituted tobacco material and method of its production
(TOBACCO : METHOD OR APPARATUS FOR MAKING RECONSTITUTED TOBACCO : Plug tobacco)

Patent 5584307: Assembly intended for operating on hair using vapour
(TOILET : HAIR DEVICE : Comb : With orifice for applying fluent material : In tubular tooth : At juncture with back)

Patent 5584308: Permanent wave method and apparatus
(TOILET : METHODS : Hair treatment by application of specific chemical composition : For deformation, setting or holding (e.g., curling or waving) :)

Patent 5584309: Method of treating hair in which a part of a length of a tress of hair protected while another part of the length of the tress of hair is
(TOILET : METHODS : Hair treatment by application of specific chemical composition : Dyeing or bleaching : And use of specific device)

Patent 5584310: Semiconductor processing with non-jetting fluid stream discharge array
(CLEANING AND LIQUID CONTACT WITH SOLIDS : : With plural means for supplying or applying different fluids at the same workstation : Means for sequentially applying different fluids : With heater or heat exchanger)

Patent 5584311: Self-supported tent frame coupler
(TENT, CANOPY, UMBRELLA, OR CANE : PORTABLE SHELTER (I.E., TENT OR CANOPY) : Framework : Arch-shaped or dome type : Collapsible : Hollow rod section (e.g., for internal cord means))

Patent 5584312: Fire damper for ceiling diffuser
(FLUID HANDLING : AMBIENT CONDITION CHANGE RESPONSIVE : Atmospheric : Soil moisture sensing)

Patent 5584313: Piston pressure-type vacuum breaker
(FLUID HANDLING : BACK FLOW PREVENTION BY VACUUM BREAKING (E.G., ANTI-SIPHON DEVICES) : Air vent in liquid flow line : Valved : With co-acting valve in liquid flow path : Gas injectors)

Patent 5584314: Self-cleaning inlet head for a fluid
(FLUID HANDLING : WITH CLEANER, LUBRICATION ADDED TO FLUID OR LIQUID SEALING AT VALVE INTERFACE : Cleaning or steam sterilizing : Reverse fluid flow : Valve manually seated)

Patent 5584315: Check valve assembly and method for mounting and installing check valves within a housing
(FLUID HANDLING : PROCESSES : Cleaning, repairing, or assembling : Valve or valve element assembling, disassembling, or replacing : Specific valve or valve element mounting or repairing)

Patent 5584316: Hydrothermal stabilizer and expansion tank system
(FLUID HANDLING : WITH HEATING OR COOLING OF THE SYSTEM : Hot and cold water system having a connection from the hot to the cold channel : Flue extending through fluid)

Patent 5584317: Lined manhole and method of making same
(FLUID HANDLING : WITH CASING, SUPPORT, PROTECTOR OR STATIC CONSTRUCTIONAL INSTALLATIONS : Static constructional installations : Ground supporting enclosure : Floor installation)

Patent 5584318: Modular fuel filter and pressure regulator apparatus
(FLUID HANDLING : WITH MEANS FOR SEPARATING SOLID MATERIAL FROM THE FLUID : Hollow strainer, fluid inlet and outlet perpendicular to each other : Reciprocating valves)

Patent 5584319: Electro-optical valve-status supervision switch circuit for fire protection
(FLUID HANDLING : WITH INDICATOR, REGISTER, RECORDER, ALARM OR INSPECTION MEANS : Position or extent of motion indicator : Electrical : Spring biased)

Patent 5584320: Multi-tube clamp actuator and mating cartridge
(FLUID HANDLING : SYSTEMS : With pump : Pumped fluid control : Manual : Pointer integral with handle)

Patent 5584321: Gas pressure control apparatus
(FLUID HANDLING : SYSTEMS : Flow path with serial valves and/or closures : Containing rotary valve)

Patent 5584322: Rotary slide valve
(FLUID HANDLING : SYSTEMS : Multi-way valve unit : Rotary valve unit : Gate)

Patent 5584323: Fluid control valve
(FLUID HANDLING : SYSTEMS : Multi-way valve unit : Supply and exhaust : Motor-operated : Electric)

Patent 5584324: Automated product draining method for a packaging machine
(FLUENT MATERIAL HANDLING, WITH RECEIVER OR RECEIVER COACTING MEANS : PROCESSES :)

Patent 5584325: Apparatus and method for controlled penetration of compressed fluid cylinders
(FLUENT MATERIAL HANDLING, WITH RECEIVER OR RECEIVER COACTING MEANS : DIVERSE FLUID CONTAINING PRESSURE FILLING SYSTEMS INVOLVING RECEIVER GAS CONTENT MODIFICATION : Gas condition control in housing for receiver : Shifted to vent or fill pipe)

Patent 5584326: Compact apparatus for the storage, delivery and mixing of fluid substances
(FLUENT MATERIAL HANDLING, WITH RECEIVER OR RECEIVER COACTING MEANS : WITH TESTING OR WEIGHING RECEIVER CONTENT : Heating or cooling)

Patent 5584327: Method and apparatus for storing and dispensing chemical solutions
(FLUENT MATERIAL HANDLING, WITH RECEIVER OR RECEIVER COACTING MEANS : PLURAL MATERIALS, MATERIAL SUPPLIES OR CHARGES IN A RECEIVER : Selectively utilized sources : Hose nozzle or faucet mounted)

Patent 5584328: Guidebush assembly for use with a finger joint template
(WOODWORKING : SHAPING MACHINE : Pattern : Work guiding templet : Vertical spindle cutter : Vertical spindle, antifriction collar : Plural tools)

Patent 5584329: Moveable shade for palladian windows
(FLEXIBLE OR PORTABLE CLOSURE, PARTITION, OR PANEL : PLURAL STRIP, SLAT, OR PANEL TYPE : Fan type : Bow or U-shape, pivoted together at ends)

Patent 5584330: Flexible partition
(FLEXIBLE OR PORTABLE CLOSURE, PARTITION, OR PANEL : PLURAL STRIP, SLAT, OR PANEL TYPE : Portable : Bow or U-shape, pivoted together at ends)

Patent 5584331: Shutter
(FLEXIBLE OR PORTABLE CLOSURE, PARTITION, OR PANEL : PLURAL STRIP, SLAT, OR PANEL TYPE : Venetian blind type : With accumulating means : With side guides : Axially traversed drum or roller)

Patent 5584332: Door assembly with support
(FLEXIBLE OR PORTABLE CLOSURE, PARTITION, OR PANEL : PLURAL STRIP, SLAT, OR PANEL TYPE : With mounting or supporting means : Track guided : With independently movable strip, slat, or panel)

Patent 5584333: Releasable panel for overhead door
(FLEXIBLE OR PORTABLE CLOSURE, PARTITION, OR PANEL : PLURAL STRIP, SLAT, OR PANEL TYPE : With mounting or supporting means : Track guided : With independently movable strip, slat, or panel)

Patent 5584334: Method of increasing strength of cast aluminum components
(METAL FOUNDING : PROCESS : Shaping liquid metal against a forming surface : Incorporating addition or chemically reactive agent to metal casting material : Adding metal-containing material : In transporting molten metal)

Patent 5584335: Device for continuous casting between rolls with applied side dams
(METAL FOUNDING : MEANS TO SHAPE METALLIC MATERIAL : Continuous or semicontinuous casting : Continuously advancing mold part : Roll couple mold : Rotatable or pivotal pattern plate)

Patent 5584336: Thin gauge roll casting method
(METAL FOUNDING : PROCESS : With measuring, testing, inspecting, or condition determination : Of continuous or semicontinuous casting : And regulating an operation : Pouring :)

Patent 5584337: Process for producing thin cast strip
(METAL FOUNDING : PROCESS : Shaping liquid metal against a forming surface : Continuous or semicontinuous casting : With diverse treatment : Electric arc melting with slag or flux)

Patent 5584338: Metal strip casting
(METAL FOUNDING : PROCESS : Shaping liquid metal against a forming surface : Continuous or semicontinuous casting : Having mold or product vibration or reciprocation : Electric arc melting with slag or flux)

Patent 5584339: Heat sink assembly for the central processor of computer
(HEAT EXCHANGE : WITH RETAINER FOR REMOVABLE ARTICLE : Electrical component : Air cooled, including fins : Heat exchange between supply and exhaust lines)

Patent 5584340: Heat exchanger with flexible tube support
(HEAT EXCHANGE : EXPANSION AND CONTRACTION RELIEVING OR ABSORBING MEANS : Relieving or absorbing means supports temperature modifier in heat exchanger : Liquid cooled)

Patent 5584341: Plate bundle for a heat exchanger
(HEAT EXCHANGE : FLOW PASSAGES FOR TWO CONFINED FLUIDS : Interdigitated plural first and plural second fluid passages : Stacked plates or shells form interplate passages : Additional transverse baffle)

Patent 5584342: Subterranean rotation-inducing device and method
(WELLS : PROCESSES : Freeing stuck object, grappling or fishing in well : Perforating, weakening or separating by mechanical means or abrasive fluid)

Patent 5584343: Method and apparatus for filling and circulating fluid in a wellbore during casing running operations
(WELLS : PROCESSES : Placing or shifting well part : With sealing feature (e.g., packer) : By auxilliary fluid control line)

Patent 5584344: Extended coverage ceiling sprinklers and systems
(FIRE EXTINGUISHERS : SPRINKLER HEADS : Grenades)

Patent 5584345: Safety ring for bottom of fire extinguisher
(FIRE EXTINGUISHERS : MOUNT, CABINET OR GUARD : With means to isolate fire from atmosphere and extinguish)

Patent 5584346: Control system for a motor grader
(EARTH WORKING : AUTOMATIC POWER CONTROL : Land leveller type :)

Patent 5584347: Implement linkage draft force sensing arrangement
(EARTH WORKING : AUTOMATIC POWER CONTROL : Draft responsive : Electrical)

Patent 5584348: Guard for a string-type lawn trimmer
(EARTH WORKING : LAWN EDGER : Draft responsive)

Patent 5584349: Mechanized tool
(EARTH WORKING : WITH DRIVE MEANS FOR TOOL OR CLEANER : Attendant supported tool : Scraper part rearranged upon reverse movement)

Patent 5584350: Wellbore sidetracking methods
(BORING OR PENETRATING THE EARTH : PROCESSES : Boring curved or redirected bores : Transporting sample to surface by fluid)

Patent 5584351: Drilling machine and method of horizontal boring
(BORING OR PENETRATING THE EARTH : PROCESSES : Boring horizontal bores : Transporting sample to surface by fluid)

Patent 5584352: Pneumatic drilling chip removal system and method
(BORING OR PENETRATING THE EARTH : PROCESSES : Boring with specific fluid : Gaseous fluid or under gas pressure :)

Patent 5584353: Well jar accelerator with expansion chamber
(BORING OR PENETRATING THE EARTH : BELOW-GROUND (1) HAMMER, OR (2) IMPACT MEMBERS : Fluid-operated : Restricted orifice for initially delaying escape of restraining fluid : Cutter element spring biased to retracted position)

Patent 5584354: Hand truck for transporting heavy machinery
(MOTOR VEHICLES : STEERED BY WALKING ATTENDANT : Overload release)

Patent 5584355: Electrical vehicle
(MOTOR VEHICLES : WITH FLUID OR MECHANICAL MEANS TO ACCUMULATE ENERGY (I) DERIVED FROM MOTION OF VEHICLE OR (II) OBTAINED FROM OPERATION OF VEHICLE MOTOR, AND GIVE UP THE ENERGY (1) WHEN NEEDED FOR VEHICLE ACCELERATION OR (2) TO POWER AN AUXILIARY SYSTEM OF THE VEHICLE : Dynamic seal or fluid curtain)

Patent 5584356: Centerline double riser with single lift cylinder and link for a low profile self propelled aerial work platform
(FIRE ESCAPE, LADDER, OR SCAFFOLD : HAVING TRANSPOSITIONING BASE AND ERECTING MEANS : Interior wall-engaging means)

Patent 5584357: Ladder
(FIRE ESCAPE, LADDER, OR SCAFFOLD : COMBINED : Platform with ladder as support)

Patent 5584358: Climbing tree stand
(FIRE ESCAPE, LADDER, OR SCAFFOLD : POLE OR STRAND GRASPING-TYPE CLIMBER : Foot- or leg-attachable : With diverse holding means for occupant : Plural rung-engaging)

Patent 5584359: Detachable wheel bearing lubricator
(LUBRICATION : BEARING PACKER : On vehicle)

Patent 5584360: Method for broad temperature range lubrication with vapors
(LUBRICATION : SYSTEMS : With lubricant treatment means : Temperature or viscosity :)

Patent 5584361: Forging die lubricator
(LUBRICATION : SYSTEMS : With measuring or metering value system : With flow regulator)

Patent 5584362: Check-out and bagging station and method
(MERCHANDISING : CUSTOMER SERVICE : Store service : Checkout counter : With means enabling price reading : Overhead)

Patent 5584363: Locking system for stabilizers
(ELEVATOR, INDUSTRIAL LIFT TRUCK, OR STATIONARY LIFT FOR VEHICLE : TRANSPORTABLE ELEVATOR : Knockdown or collapsible for transport : Wheel supported : Portion moves from use to nonuse configuration (e.g., alternate supports))

Patent 5584364: Elevator system
(ELEVATOR, INDUSTRIAL LIFT TRUCK, OR STATIONARY LIFT FOR VEHICLE : HAVING INDEPENDENT SUPPORTS CARRYING DISTINCT LOADS AND SHARING COMMON PATH : Includes redundant circuitry)

Patent 5584365: Telescoping elevator door system
(ELEVATOR, INDUSTRIAL LIFT TRUCK, OR STATIONARY LIFT FOR VEHICLE : WITH BARRIER FOR REGULATING ACCESS TO LOAD SUPPORT : Includes motor or motor driven linkage for shifting barrier : Shifts barrier mounted at landing : Through coupling with barrier on load support : Running cable type)

Patent 5584366: Vandal-safe system for fastening an electrical component on a supporting wall
(ELEVATOR, INDUSTRIAL LIFT TRUCK, OR STATIONARY LIFT FOR VEHICLE : MISCELLANEOUS : Equalizes tension in, or length of, plural linking cables)

Patent 5584367: Permanent magnet type automotive vehicle suspension
(BRAKES : INTERNAL-RESISTANCE MOTION RETARDER : Using magnetic flux : Supported by mechanical spring)

Patent 5584368: Shock absorber
(BRAKES : INTERNAL-RESISTANCE MOTION RETARDER : Including seal or guide : Between piston rod and cylinder : Via fixed or variable orifice in piston)

Patent 5584369: High speed low noise current collecting equipment and method on collecting current
(ELECTRICITY: TRANSMISSION TO VEHICLES : COLLECTORS : Trolley : Indefinite path : Bow : Splices)

Patent 5584370: Lock-up type automatic transmission system with hydraulic fluid cooling device
(CLUTCHES AND POWER-STOP CONTROL : VORTEX-FLOW DRIVE AND CLUTCH : Including drive-lockup clutch : Having fluid-pressure operator : With auxiliary source of pressure :)

Patent 5584371: Viscous fan drive system logic
(CLUTCHES AND POWER-STOP CONTROL : CLUTCHES : Fluent material : Fluid : Viscous shear : Separate reservoir : Automatic regulation : Magnetic or electric : Ball or roller)

Patent 5584372: Friction clutch, such as for a motor vehicle, the friction clutch having a clutch disc and a pressure plate, the pressure plate having a blind
(CLUTCHES AND POWER-STOP CONTROL : CLUTCHES : Axially engaging : Interposed, mating clutch-elements : With torque connection between clutch-element and its shaft : Resilient torque connection (e.g., for damping vibration) : Including chordally disposed connection : Temperature)

Patent 5584373: Conveyor system with passive roller transfer assembly
(CONVEYORS: POWER-DRIVEN : CONVEYOR SYSTEM FOR MOVING A SPECIFIC LOAD AS A SEPARATE UNIT : System includes control means responsive to sensing means : Responsive to undesired condition of load : Responsive to condition of at least one conveyor)

Patent 5584374: Method and apparatus for row-wise separation of rectilinear, plastic porous concrete bodies
(CONVEYORS: POWER-DRIVEN : CONVEYOR SYSTEM FOR MOVING A SPECIFIC LOAD AS A SEPARATE UNIT : System includes an oscillating or reciprocating load engaging element : Comprising load gripping elements : Gripping elements movable relative to one another to space articles in the load : Crowding by endless belts or chain conveyors only)

Patent 5584375: Single drive vibrational conveyor with vibrational motion altering phase control and method of determining optimal conveyance speeds therewith
(CONVEYORS: POWER-DRIVEN : CONVEYOR SECTION : Reciprocating conveying surface : With control means responsive to sensor means : Piston drive)

Patent 5584376: Parcels conveyor
(CONVEYORS: POWER-DRIVEN : CONVEYOR SECTION : Endless conveyor : Having variable conveying length : Belt tension sensor)

Patent 5584377: Chain conveyor with improved guide device
(CONVEYORS: POWER-DRIVEN : CONVEYOR SECTION : Endless conveyor : Support, guide, or hold-down means for carrier belt : Means slidably supporting belt : Brake means directly engages carrier belt)

Patent 5584378: Safety switch assembly
(ELECTRICITY: CIRCUIT MAKERS AND BREAKERS : SWITCH ACTIVATION INHIBITOR (E.G., UNAUTHORIZED/INADVERTENT USE PREVENTION) : Removable actuator : Rewinding for clock)

Patent 5584379: Disconnect switch double motion mechanism
(ELECTRICITY: CIRCUIT MAKERS AND BREAKERS : HIGH-POTENTIAL TYPE : Pivoted insulator : Removable blocking element)

Patent 5584380: Seesaw switch
(ELECTRICITY: CIRCUIT MAKERS AND BREAKERS : ELECTRIC SWITCH DETAILS : Indicators : Illuminated : Light visible through actuator : Rocker or toggle : Means for adjusting contact pressure)

Patent 5584381: Illuminated rocker buttons with light dams
(ELECTRICITY: CIRCUIT MAKERS AND BREAKERS : ELECTRIC SWITCH DETAILS : Indicators : Illuminated : Light visible through actuator : Rocker or toggle : Means for adjusting contact pressure)

Patent 5584382: Apparatus for detecting a change in position of first and second members for use in mounting the detector array of a CT scanner to a radiation
(ELECTRICITY: CIRCUIT MAKERS AND BREAKERS : ELECTRIC SWITCH DETAILS : Actuators : Auxiliary : Gravity operated)

Patent 5584383: Operating mechanism for circuit breaker
(ELECTRICITY: CIRCUIT MAKERS AND BREAKERS : CONTACT MOVED BY SUDDEN RELEASE OF STORED ENERGY, (E.G., SPRING CHARGER) : Tilting vehicle operated)

Patent 5584384: Push button switch
(ELECTRICITY: CIRCUIT MAKERS AND BREAKERS : SOLID CONTACT : Push button operated : Including alternate action mechanism (e.g., push-push) : With heart-shape cam : One end of spring is carried by actuator)

Patent 5584386: Container for safely storing and disinfecting used medical instruments
(SPECIAL RECEPTACLE OR PACKAGE : INCLUDING ANCILLARY ARTICLE CONTACTING MEDIUM : For tool or appliance : Body treatment : Transverse bristle)

Patent 5584387: Combination book and package case assembly
(SPECIAL RECEPTACLE OR PACKAGE : COMBINED OR CONVERTIBLE : Tear strip or piercer)

Patent 5584388: Apparatus for supplying two-part systems
(SPECIAL RECEPTACLE OR PACKAGE : COMBINED OR CONVERTIBLE : Including drinking vessel : Body treatment)

Patent 5584389: Pack for stick-shaped articles, such as cigarettes, and blank for producing the pack
(SPECIAL RECEPTACLE OR PACKAGE : FOR TOBACCO, PIPE OR CIGARETTE HOLDER : With segregating means : Follower type)

Patent 5584390: Package dispenser for plurality of garments
(SPECIAL RECEPTACLE OR PACKAGE : FOR APPAREL : Hinged parts)

Patent 5584391: Storage container for recorded media
(SPECIAL RECEPTACLE OR PACKAGE : FOR HOLDING A MACHINE READABLE RECORDING MEDIUM (E.G., COMPACT DISC, PHONOGRAPH RECORD, TAPE, FLOPPY DISK) : For holding a tape cassette : Including plural slots for plural cassettes : Including a distinct liner, cushion or sleeve)

Patent 5584392: Floral grouping wrapper with reinforcing member
(SPECIAL RECEPTACLE OR PACKAGE : FOR A PLANT, FLOWER, OR TREE (INCLUDES CUT OR ARTIFICIAL) : Plural)

Patent 5584393: Merchandise package
(SPECIAL RECEPTACLE OR PACKAGE : WITH SPECIFIED MATERIAL FOR CONTAINER OR CONTENT : For container lining, coating, or impregnate : Plural similar lamina : V-shaped)

Patent 5584394: Colored titaniferous coating pigment obtained as a flocculated by-product in a kaolin purification process
(CLASSIFYING, SEPARATING, AND ASSORTING SOLIDS : PRECEDENT PREPARATION OF ITEMS OR MATERIALS TO FACILITATE SEPARATION : Selective differentiation : Deflocculation and flocculation :)

Patent 5584395: High speed sorting apparatus for semiconductor device equipped with rotatable sorting drum
(CLASSIFYING, SEPARATING, AND ASSORTING SOLIDS : SORTING SPECIAL ITEMS, AND CERTAIN METHODS AND APPARATUS (E.G., POCKET TYPE AND LIGHT RESPONSIVE SORTING, ETC.) FOR SORTING ANY ITEMS : Condition responsive means controls separating means : Electrical test sensing property of item : Permeability)

Patent 5584396: Sliding pivoting storage apparatus
(SUPPORTS: RACKS : SPECIAL ARTICLE : Electrically powered : Stands)

Patent 5584397: Storage rack for storing compact disks
(SUPPORTS: RACKS : SPECIAL ARTICLE : Recorded music type : Foldable)

Patent 5584398: CD storage rack and lamp assembly
(SUPPORTS: RACKS : SPECIAL ARTICLE : Recorded music type : Foldable)

Patent 5584399: Space efficient versatile storage frame system
(SUPPORTS: RACKS : SPECIAL ARTICLE : Platelike : Construction panel : Dishwashing machine rack)

Patent 5584400: Adjustable lens rack
(SUPPORTS: RACKS : SPECIAL ARTICLE : Eyeglasses : Unlocked retained key)

Patent 5584401: Substrate-supporting side boards and a cassette utilizing the boards
(SUPPORTS: RACKS : SPECIAL ARTICLE : Platelike : Foldable)

Patent 5584402: Bag storage and dispensing rack
(SUPPORTS: RACKS : SPECIAL ARTICLE : Stacked Articles : Card or sheet : Wall mounted)

Patent 5584403: Umbrella holder
(SUPPORTS: RACKS : SPECIAL ARTICLE : Article includes elongated portion : Umbrella or cane : Wall mounted : Rotatable)

 

Back to EveryPatent.com