Patents 5530921 - 5531174

 

 

Patent 5530921: Enhanced system and method for implementing a backup control channel in a cellular telecommunication network
(TELECOMMUNICATIONS : TRANSMITTER : Including tuning : Having meter or indicator)

Patent 5530922: Power detector with matching impedance for radio frequency signal amplifiers
(TELECOMMUNICATIONS : TRANSMITTER : With feedback of modulated output signal : Automatic adjustment of tuning)

Patent 5530923: Dual mode transmission system with switched linear amplifier
(TELECOMMUNICATIONS : TRANSMITTER : With feedback of modulated output signal : Automatic adjustment of tuning)

Patent 5530924: Radio station memory presets with stored audio effects
(TELECOMMUNICATIONS : RECEIVER OR ANALOG MODULATED SIGNAL FREQUENCY CONVERTER : Signal selection based on frequency (e.g., tuning) : Channel or station selection : With channel information storage : With memory control or programming : Varactor tuned (e.g., varactor diode))

Patent 5530925: Intermediate frequency combiner for a radio communication system
(TELECOMMUNICATIONS : RECEIVER OR ANALOG MODULATED SIGNAL FREQUENCY CONVERTER : With wave collector (e.g., antenna) : Plural separate collectors : With particular output combining : With local oscillator synchronization or locking)

Patent 5530926: Method for operating a switched diversity RF receiver
(TELECOMMUNICATIONS : RECEIVER OR ANALOG MODULATED SIGNAL FREQUENCY CONVERTER : With wave collector (e.g., antenna) : Plural separate collectors : Selectively or alternately connected to receiver : By signal quality (e.g., noise) : Voltage control of oscillator)

Patent 5530927: Doubly balanced superconductive mixer network
(TELECOMMUNICATIONS : RECEIVER OR ANALOG MODULATED SIGNAL FREQUENCY CONVERTER : Frequency modifying or conversion : Unwanted oscillation or radiation prevention : With plural separate local oscillators)

Patent 5530928: Balanced dual mode mixer apparatus
(TELECOMMUNICATIONS : RECEIVER OR ANALOG MODULATED SIGNAL FREQUENCY CONVERTER : Frequency modifying or conversion : With specified local oscillator structure or coupling : With plural separate local oscillators)

Patent 5530929: Homodyne receiver minimizing oscillator leakage
(TELECOMMUNICATIONS : RECEIVER OR ANALOG MODULATED SIGNAL FREQUENCY CONVERTER : Frequency modifying or conversion : Particular frequency conversion structure or circuitry : Homodyne (i.e., zero beat or synchrodyne reception) : Plural common electrode)

Patent 5530930: Step counter usable as pocket paging receiver and method for controlling the same
(COMMUNICATIONS: ELECTRICAL : SELECTIVE : Having indication or alarm (e.g., location indication) : Code responsive (i.e., paging) : Message presentation : Display : News information provider (e.g., sports, weather, etc.))

Patent 5530931: Method and apparatus for providing a look ahead feature for enhanced call forwarding in a telecommunications system
(TELEPHONIC COMMUNICATIONS : SPECIAL SERVICES : Call diversion (e.g., call capture) : Call forwarding : Sequential ringing : Expiration of predetermined time period)

Patent 5530932: Cache coherent multiprocessing computer system with reduced power operating features
(ELECTRICAL COMPUTERS AND DIGITAL PROCESSING SYSTEMS: SUPPORT : COMPUTER POWER CONTROL : Power conservation : By shutdown of only part of system : Including generation of associated coded record)

Patent 5530933: Multiprocessor system for maintaining cache coherency by checking the coherency in the order of the transactions being issued on the bus
(ELECTRICAL COMPUTERS AND DIGITAL PROCESSING SYSTEMS: MEMORY : STORAGE ACCESSING AND CONTROL : Hierarchical memories : Caching : Coherency : No-cache flags)

Patent 5530934: Dynamic memory address line decoding
(ELECTRICAL COMPUTERS AND DIGITAL PROCESSING SYSTEMS: MEMORY : ADDRESSING COMBINED WITH SPECIFIC MEMORY CONFIGURATION OR SYSTEM : For multiple memory modules (e.g., banks, interleaved memory) :)

Patent 5530935: X-ray examination apparatus
(X-RAY OR GAMMA RAY SYSTEMS OR DEVICES : ELECTRONIC CIRCUIT : With display or signaling : Televison : Thickness or density analysis)

Patent 5530936: Semiconductor laser driving circuit
(COHERENT LIGHT GENERATORS : PARTICULAR BEAM CONTROL DEVICE : Having particular beam control circuit component : Controlling light intensity : Rotating prism)

Patent 5530937: Gas laser apparatus
(COHERENT LIGHT GENERATORS : PARTICULAR COMPONENT CIRCUITRY : Controlling current or voltage to laser : Frequency)

Patent 5530938: Non-volatile memory card device having flash EEPROM memory chips with designated spare memory chips and the method of rewriting data into the
(ELECTRICAL COMPUTERS AND DIGITAL PROCESSING SYSTEMS: MEMORY : STORAGE ACCESSING AND CONTROL : Specific memory composition : Solid-state read only memory (ROM) : Programmable read only memory (PROM, EEPROM, etc.) :)

Patent 5530939: Method and system for broadcasting and querying a database using a multi-function module
(DATA PROCESSING: DATABASE AND FILE MANAGEMENT OR DATA STRUCTURES : FILE OR DATABASE MAINTENANCE : Coherency (e.g., same view to multiple users) : Object-oriented database structure reference)

Patent 5530940: Coupling device for light pipe system
(OPTICAL WAVEGUIDES : WITH OPTICAL COUPLER : Input/output coupler : Evanescent wave coupling)

Patent 5530941: System and method for prefetching data from a main computer memory into a cache memory
(ELECTRICAL COMPUTERS AND DIGITAL PROCESSING SYSTEMS: MEMORY : STORAGE ACCESSING AND CONTROL : Shared memory area : Prioritized access regulation : Coherency)

Patent 5530942: Graphic and text interactive user interface for a program execution analyzer
(DATA PROCESSING: PRESENTATION PROCESSING OF DOCUMENT, OPERATOR INTERFACE PROCESSING, AND SCREEN SAVER DISPLAY PROCESSING : PRESENTATION PROCESSING OF DOCUMENT : Annotation control : Ruled lines)

Patent 5530943: Method for producing an executable configuration of a system program loadable into a system memory area of a processor system
(ELECTRICAL COMPUTERS AND DIGITAL PROCESSING SYSTEMS: SUPPORT : DIGITAL DATA PROCESSING SYSTEM INITIALIZATION OR CONFIGURATION (E.G., INITIALIZING, SET UP, CONFIGURATION, OR RESETTING) : Loading initialization program (e.g., booting, rebooting, warm booting, remote booting, BIOS, initial program load (IPL), bootstrapping) :)

Patent 5530944: Intelligent programmable dram interface timing controller
(ELECTRICAL COMPUTERS AND DIGITAL PROCESSING SYSTEMS: MEMORY : STORAGE ACCESSING AND CONTROL : Access timing : Resetting)

Patent 5530945: Infrastructure equipment in a wireless communication system serves different service providers
(TELECOMMUNICATIONS : RADIOTELEPHONE SYSTEM : Security or fraud prevention : Privacy, lock-out, or authentication : At remote station)

Patent 5530946: Processor failure detection and recovery circuit in a dual processor computer system and method of operation thereof
(ERROR DETECTION/CORRECTION AND FAULT DETECTION/RECOVERY : DATA PROCESSING SYSTEM ERROR OR FAULT HANDLING : Reliability and availability : Fault recovery : Resetting processor : With power supply status monitoring)

Patent 5530947: Graphics processing system having function for operating and editing data of a vector graphic and data of an image
(COMPUTER GRAPHICS PROCESSING AND SELECTIVE VISUAL DISPLAY SYSTEMS : COMPUTER GRAPHICS PROCESSING : Graphic manipulation (object processing or display attributes) : Image with abnormal condition)

Patent 5530948: System and method for command queuing on raid levels 4 and 5 parity drives
(ERROR DETECTION/CORRECTION AND FAULT DETECTION/RECOVERY : DATA PROCESSING SYSTEM ERROR OR FAULT HANDLING : Reliability and availability : Fault recovery : By masking or reconfiguration : Of memory or peripheral subsystem : Redundant stored data accessed (e.g., duplicated data, error correction coded data, or other parity-type data) :)

Patent 5530949: Transmission equipment
(ERROR DETECTION/CORRECTION AND FAULT DETECTION/RECOVERY : DATA PROCESSING SYSTEM ERROR OR FAULT HANDLING : Reliability and availability : Fault recovery : By masking or reconfiguration : Of processor : Access processor affected (e.g., I/O processor, MMU, DMA processor))

Patent 5530950: Audio data processing
(TELEPHONIC COMMUNICATIONS : AUDIO MESSAGE STORAGE, RETRIEVAL, OR SYNTHESIS : Message management : Controlled by subscriber or caller : By generated tone : Structural detail of storage medium drive)

Patent 5530951: Telephone line sharing apparatus
(TELEPHONIC COMMUNICATIONS : AUDIO MESSAGE STORAGE, RETRIEVAL, OR SYNTHESIS : Including infra-red link with landline telephone network)

Patent 5530953: Apparatus for relocating spatial information for use in data exchange in a parallel processing environment
(DATA PROCESSING: ARTIFICIAL INTELLIGENCE : NEURAL NETWORK : Structure : Digital neural network : Parallel connection :)

Patent 5530954: Telecommunication fiber optic patch panel shelf assembly
(OPTICAL WAVEGUIDES : ACCESSORIES : Splice box and surplus fiber storage/trays/organizers/ carriers : Channel waveguide)

Patent 5530955: Page memory device capable of short cycle access of different pages by a plurality of data processors
(ELECTRICAL COMPUTERS AND DIGITAL PROCESSING SYSTEMS: MEMORY : STORAGE ACCESSING AND CONTROL : Specific memory composition : Solid-state random access memory (RAM) : Programmable read only memory (PROM, EEPROM, etc.))

Patent 5530956: Non-linear optical devices employing a polysilane composition and a polysilane composition therefor
(OPTICAL WAVEGUIDES : HAVING NONLINEAR PROPERTY : Transition between geometric shapes)

Patent 5530957: Storing trees in navigable form
(DATA PROCESSING: DATABASE AND FILE MANAGEMENT OR DATA STRUCTURES : DATABASE SCHEMA OR DATA STRUCTURE : Distributed or remote access)

Patent 5530958: Cache memory system and method with multiple hashing functions and hash control storage
(ELECTRICAL COMPUTERS AND DIGITAL PROCESSING SYSTEMS: MEMORY : ADDRESSING COMBINED WITH SPECIFIC MEMORY CONFIGURATION OR SYSTEM : Addressing cache memories :)

Patent 5530959: Self-synchronizing scrambler/descrambler without error multiplication
(CRYPTOGRAPHY : COMMUNICATION SYSTEM USING CRYPTOGRAPHY : Pseudo-random sequence scrambling : Including a modem)

Patent 5530960: Disk drive controller accepting first commands for accessing composite drives and second commands for individual diagnostic drive control
(ELECTRICAL COMPUTERS AND DIGITAL DATA PROCESSING SYSTEMS: INPUT/OUTPUT : INPUT/OUTPUT DATA PROCESSING : Input/Output command process : Address data transfer)

Patent 5530961: Terminal emulator enhancer with local configurability
(DATA PROCESSING: PRESENTATION PROCESSING OF DOCUMENT, OPERATOR INTERFACE PROCESSING, AND SCREEN SAVER DISPLAY PROCESSING : OPERATOR INTERFACE (E.G., GRAPHICAL USER INTERFACE) : For plural users or sites (e.g., network) : Interface customization or adaption (e.g., client server) : Access rights to interactive controls)

Patent 5530962: Memory control device for an assay apparatus
(DATA PROCESSING: GENERIC CONTROL SYSTEMS OR SPECIFIC APPLICATIONS : SPECIFIC APPLICATION, APPARATUS OR PROCESS : Robot control : Plural controlled devices or plural nonvision controlling devices : Plural processors : Movable (e.g., rotatable))

Patent 5530963: Method and system for maintaining routing between mobile workstations and selected network workstation using routing table within each router
(ELECTRICAL COMPUTERS AND DIGITAL PROCESSING SYSTEMS: MULTICOMPUTER DATA TRANSFERRING : COMPUTER-TO-COMPUTER DATA ROUTING : Decentralized controlling : Congestion avoiding)

Patent 5530964: Optimizing assembled code for execution using execution statistics collection, without inserting instructions in the code and reorganizing
(DATA PROCESSING: SOFTWARE DEVELOPMENT, INSTALLATION, AND MANAGEMENT : SOFTWARE PROGRAM DEVELOPMENT TOOL (E.G., INTEGRATED CASE TOOL OR STAND-ALONE DEVELOPMENT TOOL) : Translation of code : Compiling code : Optimization : Including analysis of program : Including instrumentation and profiling : Using procedure or function call graph)

Patent 5530965: Multiply connectable microprocessor and microprocessor system
(ELECTRICAL COMPUTERS AND DIGITAL PROCESSING SYSTEMS: PROCESSING ARCHITECTURES AND INSTRUCTION PROCESSING (E.G., PROCESSORS) : PROCESSING ARCHITECTURE : Microprocessor or multichip or multimodule processor having sequential program control : Offchip interface : Digital Signal processor)

Patent 5530966: Protective garment for baseball umpires having an inner cushioned layer and an outer layer of interconnected plates
(APPAREL : GUARD OR PROTECTOR : Shoulder protector : Both shoulders : Vest type :)

Patent 5530967: Hockey training gloves with attachable and removable weights
(APPAREL : GUARD OR PROTECTOR : Hand or arm : Face)

Patent 5530968: Commuter's apron
(APPAREL : GARMENT PROTECTORS : Shoulder)

Patent 5530969: Method for providing a T-shirt having a configuration resembling that of a fortune cookie
(APPAREL : BODY GARMENTS : Vests : Men's outer garments : Garment supporting)

Patent 5530970: Coil spring display device
(APPAREL : HEAD COVERINGS : Combined with diverse article : Head covering includes a crown and outwardly extending visor (e.g., baseball cap, etc.))

Patent 5530971: Odor control system for toilets
(BATHS, CLOSETS, SINKS, AND SPITTOONS : VENTILATION : Water-jet pump : Operating means in sink or bath)

Patent 5530972: Emergency eyewash fountain
(BATHS, CLOSETS, SINKS, AND SPITTOONS : WASH RECEPTACLES : Emergency fountains : Overhead-gravity feed)

Patent 5530973: Camp sink with heat source
(BATHS, CLOSETS, SINKS, AND SPITTOONS : WASH RECEPTACLES : With support : With drain)

Patent 5530974: Patient repositioning and position maintenance device
(BEDS : WITH MEANS FOR RELOCATING AN INVALID (E.G., PATIENT LIFT OR TRANSFER) : Hand-held sling or flexible patient surrounding pad or sheet (e.g., for turning) : Including specific structure (e.g., clamp) attaching device to bed)

Patent 5530975: Method of lifting a patient with a sling
(BEDS : WITH MEANS FOR RELOCATING AN INVALID (E.G., PATIENT LIFT OR TRANSFER) : Hand-held sling or flexible patient surrounding pad or sheet (e.g., for turning) : Including specific structure (e.g., clamp) attaching device to bed)

Patent 5530976: Lifting device with fluid filled traction element for handicapped persons
(BEDS : WITH MEANS FOR RELOCATING AN INVALID (E.G., PATIENT LIFT OR TRANSFER) : Hoistline attachable load supporting frame and sling or flexible patient surrounding device (e.g., stretcher bottom) : Including specific structure (e.g., clamp) attaching device to bed)

Patent 5530977: Control device for folding and expanding armrail of a playpen
(BEDS : CRIB : Folding : Hammock type)

Patent 5530978: Softsided waterbed with interchangeable cover
(BEDS : WATERBED OR ASSOCIATED DEVICE : With bedclothes : Adjustable in place)

Patent 5530979: Mattress coverings
(BEDS : BEDCLOTHING : Adapted to contact mattress : Multilayer : Pivoting)

Patent 5530980: Leg stabilization sleeping device
(BEDS : SUPPORT MEANS FOR DISCRETE PORTION OF USER, USEABLE WITH BED OR SURGICAL SUPPORT : For lower body portions : Including restraining means)

Patent 5530981: Toothbrush having a tongue scraper disposed therein
(BRUSHING, SCRUBBING, AND GENERAL CLEANING : IMPLEMENTS : Combined : Brush and scraper : Dauber and polisher)

Patent 5530982: Wringable flat-surface sponge mop
(BRUSHING, SCRUBBING, AND GENERAL CLEANING : IMPLEMENTS : Combined : Wiper : Mop and wringer : Sponge mop : Radial bristle)

Patent 5530983: Appliance for washing, massaging, or heat-treating the back
(BRUSHING, SCRUBBING, AND GENERAL CLEANING : IMPLEMENTS : Brush or broom : Special work : Screw operated)

Patent 5530984: Quick wipe eraser for chalkboards
(BRUSHING, SCRUBBING, AND GENERAL CLEANING : IMPLEMENTS : Fabric : Wiper, dauber, or polisher : Fountain)

Patent 5530985: Wire brush
(BRUSHING, SCRUBBING, AND GENERAL CLEANING : IMPLEMENTS : Fabric : Wiper, dauber, or polisher : Scourer (hand manipulated) : Having strands)

Patent 5530986: Buffer covering
(BRUSHING, SCRUBBING, AND GENERAL CLEANING : ATTACHMENTS : Covers and cover holders : Moveable carriage)

Patent 5530987: Condensate drain controller
(BRUSHING, SCRUBBING, AND GENERAL CLEANING : MACHINES : With air blast or suction : With automatic control : Air blast only (e.g., boiler soot-blower))

Patent 5530988: Device for clearing pipes or other lines with pressurized gas
(BRUSHING, SCRUBBING, AND GENERAL CLEANING : MACHINES : With air blast or suction : Air blast only : For hollow work, internal cleaning, e.g., tube soot-blowers : Dry mop type, e.g., textile strand or sheet pelt)

Patent 5530989: Dual durometer handles
(MISCELLANEOUS HARDWARE : HANDLE, HANDLE COMPONENT, OR HANDLE ADJUNCT : Handle with ergonomic structure (e.g., finger engagement structure such as indents, grooves, etc.) and handle user-interaction (human engineering) enhancements such as improved handle dimensions and handle positioning : Cord or rope related)

Patent 5530990: Handle assembly for suitcase
(MISCELLANEOUS HARDWARE : HANDLE, HANDLE COMPONENT, OR HANDLE ADJUNCT : Length adjustable pull handle for luggage or luggage cart (e.g., wheeled suitcase handle, etc.) : Wheel and guide roller)

Patent 5530991: Block and tackle window balance
(MISCELLANEOUS HARDWARE : SASH BALANCES : Spring : Drum and cord : Link type)

Patent 5530992: Double-sided hinges
(MISCELLANEOUS HARDWARE : HINGE : Latch hinge : Latch hinge)

Patent 5530993: Device for holding a flap door to a horizontal position
(MISCELLANEOUS HARDWARE : HINGE : Including means to hold or retard hinged members against pivotal movement (e.g., catch) : Resiliently biased catch : Sliding : And catch receiving socket : And catch receiving socket)

Patent 5530994: Dust and trash removal system for carding machines
(TEXTILES: FIBER PREPARATION : WORKING : Carding : Stripping : Pneumatic : Bends)

Patent 5530995: Combing machine having a web guide device
(TEXTILES: FIBER PREPARATION : WORKING : Combing : Tuft combing : Detaching (i.e., segment) : Roll : Adjusting)

Patent 5530996: Band clamp fitting structure
(BUCKLES, BUTTONS, CLASPS, ETC. : BALE AND PACKAGE TIES, HOSE CLAMPS : Metal bands : Tangential screw)

Patent 5530997: Lever particularly for sports shoes
(BUCKLES, BUTTONS, CLASPS, ETC. : STRAP TIGHTENERS : Ski, boot, and shoe fasteners : Dress hem raisers)

Patent 5530998: Twist and snap fastener made of identical mating parts
(BUCKLES, BUTTONS, CLASPS, ETC. : SEPARABLE-FASTENER OR REQUIRED COMPONENT THEREOF (E.G., PROJECTION AND CAVITY TO COMPLETE INTERLOCK) : Each mating member having similarly shaped, sized, and operated interlocking or intermeshable face : Sliding or rotating element : For apparel)

Patent 5530999: Axial locking device
(BUCKLES, BUTTONS, CLASPS, ETC. : SEPARABLE-FASTENER OR REQUIRED COMPONENT THEREOF (E.G., PROJECTION AND CAVITY TO COMPLETE INTERLOCK) : With third detached member completing interlock (e.g., hook type) : Quick connect or release (e.g., spring and detent) : Coiled wire)

Patent 5531000: Slide locking externally removable casket hardware
(UNDERTAKING : CASKET CARRIERS : Chin support)

Patent 5531001: Device for yarn division on a sectional warping machine
(TEXTILES: MANUFACTURING : WARP PREPARING OR HANDLING : Reeling or beaming : Leasing : Warp engaging drive means)

Patent 5531002: Method of manufacturing physical quantity detector
(METAL WORKING : ELECTRIC CONDENSER MAKING : Barrier layer device making)

Patent 5531003: Fabricating a combination feedthrough/capacitor including a metallized tantalum or niobium pin
(METAL WORKING : ELECTRIC CONDENSER MAKING : Solid dielectric type : Electrolytic device making (e.g., capacitor))

Patent 5531004: Machining center having a rotary door openable by an automatic pallet changer
(METAL WORKING : PLURAL DIVERSE MANUFACTURING APPARATUS INCLUDING MEANS FOR METAL SHAPING OR ASSEMBLING : Multiple station with conveyor : And work-holder for assembly)

Patent 5531005: Device for fixed positioning of a pallet on a work table
(METAL WORKING : PLURAL DIVERSE MANUFACTURING APPARATUS INCLUDING MEANS FOR METAL SHAPING OR ASSEMBLING : Multiple station with conveyor : And work-holder for assembly)

Patent 5531006: Machine for tapering pipe ends with different diameters
(METAL WORKING : PLURAL DIVERSE MANUFACTURING APPARATUS INCLUDING MEANS FOR METAL SHAPING OR ASSEMBLING : Work on tubes : And work-holder for assembly)

Patent 5531007: Shear processor for steel structures
(CUTLERY : COMBINED CUTLERY OR COMBINED WITH ANCILLARY FEATURE : With material-holder or disposal : Shears : Grip type : Suction-disposal means)

Patent 5531008: Method and apparatus for making a bubble spring assembly
(METAL WORKING : MEANS TO ASSEMBLE OR DISASSEMBLE : Spring applier or remover : Leaf spring : With ring encirclement)

Patent 5531009: Apparatus for removing an undeformed rivet from a hole
(METAL WORKING : MEANS TO ASSEMBLE OR DISASSEMBLE : Overedge assembling means : Riveter : With second workpiece inside annular work one workpiece moved to shape the other)

Patent 5531010: Marine lower unit altering process
(METAL WORKING : METHOD OF MECHANICAL MANUFACTURE : Converting : Hollow ball)

Patent 5531011: Longshoreman's stacking pin tool and process
(METAL WORKING : METHOD OF MECHANICAL MANUFACTURE : Assembling or joining : By applying force)

Patent 5531012: System and method for riveting clips to conveyor-belt ends
(METAL WORKING : METHOD OF MECHANICAL MANUFACTURE : Assembling or joining : Punching, piercing or reaming part by surface of second part : With shaping : Screw threaded fastener)

Patent 5531013: Method of and apparatus for assembling work unit
(METAL WORKING : METHOD OF MECHANICAL MANUFACTURE : Assembling or joining : Retaining clearance for motion between assembled parts : Through resilient media : Of first part)

Patent 5531014: Electromechanical press and method of operating
(METAL WORKING : PLURAL DIVERSE MANUFACTURING APPARATUS INCLUDING MEANS FOR METAL SHAPING OR ASSEMBLING : Including composite tool : Including severing means : To trim electric component : To sever product to length)

Patent 5531015: Method of making superconducting wind-and-react coils
(METAL WORKING : METHOD OF MECHANICAL MANUFACTURE : Electrical device making : Superconductor : Rotor)

Patent 5531016: Method of manufacturing a thin-film magnetic head
(METAL WORKING : METHOD OF MECHANICAL MANUFACTURE : Electrical device making : Electromagnet, transformer or inductor : Magnetic recording reproducing transducer (e.g., tape head, core, etc.) : Fabricating head structure or component thereof : Machining magnetic material (e.g., grinding, etching, polishing) : Depositing magnetic layer or coating)

Patent 5531017: Thin film magnetic head fabrication method
(METAL WORKING : METHOD OF MECHANICAL MANUFACTURE : Electrical device making : Electromagnet, transformer or inductor : Magnetic recording reproducing transducer (e.g., tape head, core, etc.) : Fabricating head structure or component thereof : Including measuring or testing : With significant slider/housing shaping or treating :)

Patent 5531018: Method of micromachining electromagnetically actuated current switches with polyimide reinforcement seals, and switches produced thereby
(METAL WORKING : METHOD OF MECHANICAL MANUFACTURE : Electrical device making : Switch making : Strain gauge making)

Patent 5531019: Solid oxide fuel cell and manufacturing method thereof
(METAL WORKING : METHOD OF MECHANICAL MANUFACTURE : Electrical device making : Electric battery cell making : Including coating or impregnating : Applying terminal)

Patent 5531020: Method of making subsurface electronic circuits
(METAL WORKING : METHOD OF MECHANICAL MANUFACTURE : Electrical device making : Conductor or circuit manufacturing : On flat or curved insulated base, e.g., printed circuit, etc. : Assembling to base an electrical component, e.g., capacitor, etc. : By metal fusion : With deforming of lead or terminal)

Patent 5531021: Method of making solder shape array package
(METAL WORKING : METHOD OF MECHANICAL MANUFACTURE : Electrical device making : Conductor or circuit manufacturing : On flat or curved insulated base, e.g., printed circuit, etc. : Assembling terminal to base : By metal fusion bonding : With deforming of lead or terminal)

Patent 5531022: Method of forming a three dimensional high performance interconnection package
(METAL WORKING : METHOD OF MECHANICAL MANUFACTURE : Electrical device making : Conductor or circuit manufacturing : On flat or curved insulated base, e.g., printed circuit, etc. : Manufacturing circuit on or in base : By using wire as conductive path : Simultaneous circuit manufacturing)

Patent 5531023: Method of manufacturing mammoth ivory jewelry
(METAL WORKING : METHOD OF MECHANICAL MANUFACTURE : Jewelry or locket making : Human adornment device making : With coating or casting about a core)

Patent 5531024: Method of making a full face wheel
(METAL WORKING : METHOD OF MECHANICAL MANUFACTURE : Wheel making : Land wheel : Disc type wheel : Assembling wheel disc to rim : With disc shaping : Of fused material)

Patent 5531025: Nail clipper with index finger holder
(CUTLERY : MANICURE : Nippers : And fulcrum)

Patent 5531026: Stripping tool for armored fiber optic cables
(CUTLERY : MEANS FOR CUTTING ELONGATE, STRAND-ENCIRCLING SHEATH : Longitudinally : Including rotary cutter)

Patent 5531027: Hedge trimmer drive assembly
(CUTLERY : CUTTING TOOLS : Plural cooperating blades : Shears : Multiple shearing position : Reciprocating and/or oscillating blade : Rotary power source : With motor : With blade-tension means)

Patent 5531028: Printed sheet measuring device
(GEOMETRICAL INSTRUMENTS : MISCELLANEOUS : Printed sheet :)

Patent 5531029: Do it yourself hem line marker with chalk
(GEOMETRICAL INSTRUMENTS : APPAREL : Stand supported : Skirts : Powder-marking :)

Patent 5531030: Self-calibrating wheel alignment apparatus and method
(GEOMETRICAL INSTRUMENTS : GAUGE : Wheel : Saw)

Patent 5531031: Laser level and square
(GEOMETRICAL INSTRUMENTS : INDICATOR OF DIRECTION OF FORCE TRAVERSING NATURAL MEDIA : Level or plumb, terrestrial gravitation responsive : Dip aligning needle)

Patent 5531032: Hair dryer with integral stereo audio system
(DRYING AND GAS OR VAPOR CONTACT WITH SOLIDS : APPARATUS : Combined : With ruler)

Patent 5531033: Controlled profile drying hood
(DRYING AND GAS OR VAPOR CONTACT WITH SOLIDS : APPARATUS : Rotary drums or receptacles : External : Plural : With belts or felts : With threading, stripping, or guiding devices :)

Patent 5531034: Horizontal dryer having a screw conveyor and ring electrical heating elements
(DRYING AND GAS OR VAPOR CONTACT WITH SOLIDS : APPARATUS : Stationary receptacle or tube with agitator or conveyor : Shelf-to-shelf or zigzag treated material flow)

Patent 5531035: Snowshoe binding assembly
(BOOTS, SHOES, AND LEGGINGS : BOOTS AND SHOES : Occupational or athletic shoe (e.g., roof climbing, gardening, etc.) : Athletic shoe or attachment therefor : For a sport (e.g., skating, skiing, etc.) featuring relative movement between shoe and ground : For walking or sliding on shifting media : Snow shoe (e.g., having binding, harness, etc.) : With binding permitting foot to pivot : Pivot on rear quarter)

Patent 5531036: Forklift vehicle plow attachment
(EXCAVATING : COMBINED OR CONVERTIBLE : Combined with fork or rake : Including cable or rope control means to facilitate loading, transporting, or dumping)

Patent 5531037: Water proportioning device for steam irons
(TEXTILES: IRONING OR SMOOTHING : SMOOTHING IMPLEMENTS : Flatirons : Combined : With moistening means : Including reservoir for liquid in steam iron : Power-operated)

Patent 5531038: Corner mountable display device for greeting cards
(CARD, PICTURE, OR SIGN EXHIBITING : DISPLAY CARD : Having magnetic means : With translucent plate)

Patent 5531039: Base for mounting a telescopic sight on a gun
(FIREARMS : IMPLEMENTS : Sight devices : Telescopic type : Mount or mounting : And an illuminating or incandescent device)

Patent 5531040: Laser module mounting means for weapons and other applications
(FIREARMS : IMPLEMENTS : Sight devices : Focused beam (e.g., laser on target, etc.) : Having beam adjusting structure or mounted for correction : Single trigger and hammer)

Patent 5531041: Guiding device for fishing-rod lines
(FISHING, TRAPPING, AND VERMIN DESTROYING : FISHING : Rod : Line guides or tips : Motor operated)

Patent 5531042: Fishing sinker having interchangeable weights
(FISHING, TRAPPING, AND VERMIN DESTROYING : FISHING : Artificial bait : Substance emitting and/or water passage : Lure slidable on line)

Patent 5531043: Poisonous bait container for crawling insects
(FISHING, TRAPPING, AND VERMIN DESTROYING : VERMIN DESTROYING : Poison holders : Vaporizers)

Patent 5531044: Landscape edging device and method
(PLANT HUSBANDRY : ORNAMENTAL BEDS : Method)

Patent 5531045: Automatic window sash and lock operator
(MOVABLE OR REMOVABLE CLOSURES : OPERATOR INTERRELATED WITH CLOSURE LATCH RELEASE : Handle-camming lever)

Patent 5531046: Power sliding window assembly
(MOVABLE OR REMOVABLE CLOSURES : WITH OPERATOR FOR MOVABLY MOUNTED CLOSURE : Operator drives closure along guide : Lever-actuated drive)

Patent 5531047: Glazing unit having three or more glass sheets and having a low thermal edge, and method of making same
(STATIC STRUCTURES (E.G., BUILDINGS) : TRANSPARENT PANEL HAVING ACTIVE TREATMENT WITH GAS OR LIQUID : Hygroscopic material; e.g., internal drier : With laterally spaced foundation element)

Patent 5531048: Step for a stairway and method for making same
(STATIC STRUCTURES (E.G., BUILDINGS) : STEPPED; E.G., STAIR : Tread unit on horizontal tread member connected to riser : Closure)

Patent 5531049: Roof mounted light transmitting frame
(STATIC STRUCTURES (E.G., BUILDINGS) : CUPOLA OR SKYLIGHT : Attic vent)

Patent 5531050: Drywall corner finishing device
(STATIC STRUCTURES (E.G., BUILDINGS) : INTERSECTION OF WALL TO FLOOR, CEILING, ROOF, OR ANOTHER WALL (I.E., TWO-WAY CORNER CONSTRUCTION) : With revealed embedded protector : Block type having vertical and horizontal keys)

Patent 5531051: Connector clip for corner bead
(STATIC STRUCTURES (E.G., BUILDINGS) : INTERSECTION OF WALL TO FLOOR, CEILING, ROOF, OR ANOTHER WALL (I.E., TWO-WAY CORNER CONSTRUCTION) : With revealed embedded protector : Cast in situ facings (e.g., corner bead) : Lockpin-type tie)

Patent 5531052: Unitary suspension clip for supporting partition walls
(STATIC STRUCTURES (E.G., BUILDINGS) : FACER HELD BY STIFFENER-TYPE FRAME : Facer back abuts and conceals frame : Including clip-type fastener : Having a prong-type portion : Filler)

Patent 5531053: Spring fastener for holding insulation against an inner surface of cavity walling
(STATIC STRUCTURES (E.G., BUILDINGS) : ASSEMBLED IN SITU-TYPE ANCHOR OR TIE : Sheet or wire tie : Separably connected sections : X-braced; i.e., connectors crossing)

Patent 5531054: Reinforced wooden wall
(STATIC STRUCTURES (E.G., BUILDINGS) : PROCESSES : Tension member (e.g., re-bar))

Patent 5531055: Refill assembly and system for ink-jet printer cartridges
(PACKAGE MAKING : GAS FILLING AND/OR EVACUATING OF RECEPTACLE AND CLOSING : Within enclosure : Iron application only)

Patent 5531056: Method and apparatus for stabilizing cartons in a packaging machine
(PACKAGE MAKING : DEPOSITING ARTICLES AND ARRANGING MATERIAL IN PREFORMED RECEPTACLES : With movement of receptacle to or from filling station : With means to supply successive receptacles : Contents or receptacle transfer between conveyers : Rotary turret or carrier)

Patent 5531057: Bottle cap delivery system
(PACKAGE MAKING : CLOSING PACKAGES AND FILLED RECEPTACLES : Separate closure applying : Closure delivery from supply into or below bottom of header : Turret supporting closure below header : Concentric with or at infeed of closure)

Patent 5531058: Means for securing a decorative cover about a flower pot
(PACKAGE MAKING : METHODS : Applying a partial cover : Banding :)

Patent 5531059: Method for shrink wrapping luggage
(PACKAGE MAKING : METHODS : Forming a cover adjunct or application of a cover adjunct to a cover : Handle :)

Patent 5531060: Method of producing interiorly sterile packages possessing superior barrier properties
(PACKAGE MAKING : METHODS : Sterilizing cover only : For preformed receptacle with separate closure)

Patent 5531061: System and method for packaging bales of hay and an improved wrapping apparatus
(PACKAGE MAKING : WITH CONTENTS TREATING : Reshaping : Compacting or stretching : Compressing with or through cover : Diary product)

Patent 5531062: Tensioning mechanism for upper mower conditioner roll
(HARVESTERS : MOTORIZED HARVESTER : Having driven means for handling or treating crop : With crop conditioner means : With rolling or pressing elements : With latchable lever means for pivoting harvester)

Patent 5531063: Device for forming core/wrap yarn
(TEXTILES: SPINNING, TWISTING, AND TWINING : APPARATUS AND PROCESSES : Covering or wrapping : With twisting of core or product : With wire or strand preforming or shaping)

Patent 5531064: Optical fiber cable containing ribbon fibers
(TEXTILES: SPINNING, TWISTING, AND TWINING : STRAND STRUCTURE : Alternately twisted :)

Patent 5531065: Fine jewelry diamond cut rope chain and method of manufacture thereof
(CHAIN, STAPLE, AND HORSESHOE MAKING : CHAINS : Ornamental : Sliding link)

Patent 5531066: Fuel injector and igniter assembly
(POWER PLANTS : COMBUSTION PRODUCTS USED AS MOTIVE FLUID : Combustion products generator : With ignition device : Catalytic type : In an axial direction)

Patent 5531067: Optimized system for feeding a reignitable rocket engine
(POWER PLANTS : REACTION MOTOR (E.G., MOTIVE FLUID GENERATOR AND REACTION NOZZLE, ETC.) : Liquid oxidizer : Including pressurizing means : Compressor or turbine speed sensed to control fuel flow or outlet area)

Patent 5531068: Combination catalyst/adsorber system for treating an engine exhaust gas stream
(POWER PLANTS : INTERNAL COMBUSTION ENGINE WITH TREATMENT OR HANDLING OF EXHAUST GAS : Methods : Anti-pollution : Motive fluid is vaporized liquid)

Patent 5531069: Catalyst deterioration-determining device of an internal combustion engine
(POWER PLANTS : INTERNAL COMBUSTION ENGINE WITH TREATMENT OR HANDLING OF EXHAUST GAS : Having means analyzing composition of exhaust gas : Anti-pollution)

Patent 5531070: Diesel engine reverse start inhibit
(POWER PLANTS : PRESSURE FLUID SOURCE AND MOTOR : Methods of operation : Having cam, or lever system driving master)

Patent 5531071: Hydraulic system
(POWER PLANTS : PRESSURE FLUID SOURCE AND MOTOR : Having a mechanical clutch or brake device in the power train : Condition or direction responsive device : Condition or direction responsive device)

Patent 5531072: Continuously variable hydrostatic transmission having swashplate-mounted cylinder blocks
(POWER PLANTS : PRESSURE FLUID SOURCE AND MOTOR : Input pump and rotary output motor system having displacement varying type of direction or speed selector : Both motor and pump have displacement adjustment means : Having common or intercontrolled adjuster actuating means : Motor swash plate and pump swash plate intercontrolled : Motive fluid pressure responsive)

Patent 5531073: Rankine cycle power plant utilizing organic working fluid
(POWER PLANTS : UTILIZING NATURAL HEAT : Geothermal : With ignition device)

Patent 5531074: Electronic device freezed by intermittently driven refrigerator
(REFRIGERATION : GAS COMPRESSION, HEAT REGENERATION AND EXPANSION, E.G., STIRLING CYCLE : Thermoelectric; e.g., peltier effect)

Patent 5531075: Process to transport acetylene
(REFRIGERATION : STORAGE OF SOLIDIFIED OR LIQUIFIED GAS (E.G., CRYOGEN) : With sorbing or mixing : Air)

Patent 5531076: Multi-split fan control
(REFRIGERATION : AUTOMATIC CONTROL : Of external fluid or means : Cooling fluid for heat rejecter, e.g., condenser : By refrigerant : Sequential)

Patent 5531077: Refrigerating system with auxiliary compressor-cooling device
(REFRIGERATION : AUTOMATIC CONTROL : Refrigeration producer : Bypass, e.g., compressor unloading : Of expansion zone : Sequential)

Patent 5531078: Low volume inlet reciprocating compressor for dual evaporator refrigeration system
(REFRIGERATION : AUTOMATIC CONTROL : Refrigeration producer : Bypass, e.g., compressor unloading : Of expansion zone : Through an evaporator, i.e., parallel : Including sorbent refrigerant flow)

Patent 5531079: Bearing structure for auger-type ice making machines
(REFRIGERATION : MEANS PRODUCING SHAPED OR MODIFIED CONGEALED PRODUCT : Heat absorber with product remover : Moving scraper : Elongated vertical passage for melt and air)

Patent 5531080: Refrigerant circulating system
(REFRIGERATION : REFRIGERATION PRODUCER : With lubricant handling means : Lubricant separator : Lateral ice melt distributor)

Patent 5531081: Two piece laundry additive dispenser cup
(TEXTILES: FLUID TREATING APPARATUS : MACHINES : Combined : With soap supply : Dispenser on agitator : With temperature modification)

Patent 5531082: Portable security case
(LOCKS : SPECIAL APPLICATION : For portable articles : Receptacle : Protectors)

Patent 5531083: Cable lock device
(LOCKS : SPECIAL APPLICATION : For portable articles : Parts, accessories, attachments and adjuncts)

Patent 5531084: Key for rotary plug and cylinder lock, and method of forming the key
(LOCKS : OPERATING MECHANISM : Key : Operating elements : Keys : Bitting : Irregular nonplanar or undulated)

Patent 5531085: Die lubricant applicator
(METAL DEFORMING : WITH CLEANING, DESCALING, OR LUBRICATION OF WORK OR PRODUCT : Lubricating : With means to apply lubricant : By sensing hydraulic pressure)

Patent 5531086: Keyless entry deadbolt lock
(LOCKS : OPERATING MECHANISM : Using a powered device (e.g., motor) : Electrical type (e.g., solenoid) : And alternately mechanically actuated by a key, dial, etc. : Using a dial having indicia or pointer and indicia)

Patent 5531087: Metal sheet bending machine
(METAL DEFORMING : WITH USE OF OPTICAL OR TRANSPARENT (E.G., VIEWING) MEANS : Work drawn or extruded through die)

Patent 5531088: Rotary forging apparatus
(METAL DEFORMING : BY USE OF TOOL ACTING DURING RELATIVE ROTATION BETWEEN TOOL AND WORK ABOUT INTERNAL CENTER (E.G., GYRATING OR ROTATING TOOL) : During rotation of work : Using tool having rotating surface moving along it axis of rotation during deformation : With means causing cooperating presser member to traverse form surface)

Patent 5531089: Sheet crown control method and rolling equipment line for endless rolling
(METAL DEFORMING : BY USE OF ROLLER OR ROLLER-LIKE TOOL-ELEMENT : With carrier for roller-couple or tool-couple : Including back-up for roller : With means to relatively vary back-up force along roller axis : Means to apply bending moment to roller or back-up roll : Including adjustable tool)

Patent 5531090: Adjusting device for the brush roll in a roll stand
(METAL DEFORMING : BY USE OF ROLLER OR ROLLER-LIKE TOOL-ELEMENT : With cleaning or conditioning of tool, or lubrication of tool or machine : Including successively-acting roller-couples)

Patent 5531091: Sensor with quartz tuning fork
(MEASURING AND TESTING : INSTRUMENT PROVING OR CALIBRATING : Speed, velocity, or acceleration : Acceleration utilizing an inertial element : Prover bell)

Patent 5531092: Device for moving a suspended weight body
(MEASURING AND TESTING : INSTRUMENT PROVING OR CALIBRATING : Dynamometer : Weight : Wrench)

Patent 5531093: Means for positioning and repositioning scanning instruments
(MEASURING AND TESTING : INSTRUMENT PROVING OR CALIBRATING : Angle, direction, or inclination : Volumetric dispenser (e.g., pipette))

Patent 5531094: Apparatus for testing prosthetic heart valve hinge mechanism
(MEASURING AND TESTING : INSTRUMENT PROVING OR CALIBRATING : Fluid pressure : Pressure activated device : Valve : Varying)

Patent 5531095: Method and apparatus for determining the mechanical durability of the surface finish of a cooking vessel
(MEASURING AND TESTING : BY ABRASION, MILLING, RUBBING, OR SCUFFING : Roughness or hardness)

Patent 5531096: Gas analyzer and method for analyzing a gas
(MEASURING AND TESTING : GAS ANALYSIS : Particular separator)

Patent 5531097: Absolute humidity meter
(MEASURING AND TESTING : GAS ANALYSIS : Moisture content or vapor pressure : Hygrometer : Impactor)

Patent 5531098: Hybrid inflator testing tank
(MEASURING AND TESTING : EXPLOSIVE : Safety feature or containment structure : Pressure)

Patent 5531099: Underground conduit defect localization
(MEASURING AND TESTING : WITH FLUID PRESSURE : Leakage : Fluid handling conduit in situ : Using acoustic detectors : Tensioned)

Patent 5531100: Method of detecting a leaky exhaust valve
(MEASURING AND TESTING : WITH FLUID PRESSURE : Leakage : Between fitted parts (e.g., joints) : Piston, piston ring, or engine valve : Mesh envelope)

Patent 5531101: Package testing
(MEASURING AND TESTING : WITH FLUID PRESSURE : Leakage : Receptacle : Sealed : Mesh envelope)

Patent 5531102: Viscometer usable in situ in large reactor vessels
(MEASURING AND TESTING : LIQUID ANALYSIS OR ANALYSIS OF THE SUSPENSION OF SOLIDS IN A LIQUID : Viscosity : Force reactance to member driven therein : Rotationally driven member : By measuring an opposed drag force : With detail of a drive means or a detecting means)

Patent 5531103: Method and apparatus for determining velocity dependent corrosion rate
(MEASURING AND TESTING : LIQUID ANALYSIS OR ANALYSIS OF THE SUSPENSION OF SOLIDS IN A LIQUID : Content or effect of a constituent of a liquid mixture : Depositing characteristic : Detector detail)

Patent 5531104: Device and method for automatic detection of the height of sedimentation in a sedimentometer
(MEASURING AND TESTING : LIQUID ANALYSIS OR ANALYSIS OF THE SUSPENSION OF SOLIDS IN A LIQUID : Content or effect of a constituent of a liquid mixture : Settling or filtering ability : Sedimentation rate : By optical measurement : By measuring a counterbalance or restoring force)

Patent 5531105: Method and system for determining engine oil consumption
(MEASURING AND TESTING : MOTOR AND ENGINE TESTING : Pressure derivative)

Patent 5531106: Volume control system for a chromatograph
(MEASURING AND TESTING : LIQUID ANALYSIS OR ANALYSIS OF THE SUSPENSION OF SOLIDS IN A LIQUID : Content or effect of a constituent of a liquid mixture : Liquid constituent of a liquid mixture : Chromatography : Detail of fluid handling means (e.g., valve, control, etc.) : By measuring a counterbalance or restoring force)

Patent 5531107: Method and apparatus for establishing virtual inertia in a chassis dynamometer
(MEASURING AND TESTING : MOTOR AND ENGINE TESTING : With vehicle wheel supporting roller or belt : Miles per gallon)

Patent 5531108: Adaptive correction of torsional and wheel profile position irregularities for misfire detection
(MEASURING AND TESTING : MOTOR AND ENGINE TESTING : Disparate tests under operating conditions : With continuous operation : By angular displacement of opposite ends of specimen)

Patent 5531109: Indicator of the air pressure in the pneumatic tires of a vehicle based on a capacitive coupling
(MEASURING AND TESTING : TIRE, TREAD OR ROADWAY : Tire inflation testing installation : By direct fluid pressure reading : Telemetric (e.g., indicator on cowl) : Electric : Cantilever)

Patent 5531110: Method and apparatus for estimating disturbance acting on vehicle tired wheel based on wheel angular velocity and equation of state
(MEASURING AND TESTING : TIRE, TREAD OR ROADWAY : Responsive to force)

Patent 5531111: Structure of a volumetric measuring apparatus
(MEASURING AND TESTING : VOLUMETRIC CONTENT MEASURING : Tire inflation testing installation)

Patent 5531112: Fluid holdup tool for deviated wells
(MEASURING AND TESTING : BOREHOLE OR DRILLING (E.G., DRILL LOADING FACTOR, DRILLING RATE, RATE OF FLUID FLOW) : Formation logging (e.g., borehole studies of pressure derivatives or of pressure-temperature derivatives) : By direct fluid pressure reading)

Patent 5531113: Ballistics measuring system
(MEASURING AND TESTING : ORDNANCE AND PROJECTILE : Filament)

Patent 5531114: Rain gauge
(MEASURING AND TESTING : METEOROLOGY : Precipitation (e.g., rain gauge) : Thrust or drag force)

Patent 5531115: Self-calibrating three axis angular rate sensor
(MEASURING AND TESTING : SPEED, VELOCITY, OR ACCELERATION : Angular rate using gyroscopic or Coriolis effect : Gyroscope)

Patent 5531116: Apparatus and method for phase tomographic determination of fluid currents
(MEASURING AND TESTING : VIBRATION : By mechanical waves : Beamed : Velocity or propagation time measurement : Horizontal fulcrum)

Patent 5531117: Closed loop maximum likelihood phase aberration correction in phased-array imaging systems
(MEASURING AND TESTING : VIBRATION : By mechanical waves : Beamed : With signal analyzing or mathematical processing : For flaw or discontinuity detection)

Patent 5531118: Method and device for operating an ultrasonic sensor
(MEASURING AND TESTING : VIBRATION : By mechanical waves : Beamed : By reflected wave : Having plural sonic type transmitters or receivers tranducers : Having plural sonic type transmitter or receiver transducers)

Patent 5531119: Ultrasound probe with bubble trap
(MEASURING AND TESTING : VIBRATION : Sensing apparatus : With electrically controlled indicator : Having a probe : Current generating or modifying)

Patent 5531120: Compact differential pressure transmitter having first and second damper chambers
(MEASURING AND TESTING : FLUID PRESSURE GAUGE : With protective separator : Vibrating strip or wire)

Patent 5531121: Micromachined integrated pressure sensor with oxide polysilicon cavity sealing
(MEASURING AND TESTING : FLUID PRESSURE GAUGE : Diaphragm : Multiple and/or differential : Spring and adjustor connect paired weights)

Patent 5531122: Fatigue analysis and warning system
(MEASURING AND TESTING : SPECIMEN STRESS OR STRAIN, OR TESTING BY STRESS OR STRAIN APPLICATION : By penetrator or indentor)

Patent 5531123: Remote and powerless miniature fatigue monitor and method
(MEASURING AND TESTING : SPECIMEN STRESS OR STRAIN, OR TESTING BY STRESS OR STRAIN APPLICATION : By loading of specimen (e.g., strength of material test) : Plural diverse stress-strain tests or composite loads : Strain : Moving chart)

Patent 5531124: Ultrasonic flow measuring method and apparatus thereof
(MEASURING AND TESTING : VOLUME OR RATE OF FLOW : By measuring vibrations or acoustic energy : Transit time of acoustic waves : Vortex shedders)

Patent 5531125: Method and device for simultaneously measuring the flow speed and the depth of a river
(MEASURING AND TESTING : VOLUME OR RATE OF FLOW : By measuring vibrations or acoustic energy : Transit time of acoustic waves : Vortex shedders)

Patent 5531126: Coriolis-type mass flow sensor with flow condition compensating
(MEASURING AND TESTING : VOLUME OR RATE OF FLOW : Mass flow by imparting angular or transverse momentum to the fluid : Coriolis or gyroscopic : Vibrated conduit : Drive and sensor element located on straight conduit portion : Selective or periodic sampling)

Patent 5531127: Optical torque sensor
(MEASURING AND TESTING : DYNAMOMETERS : Responsive to torque : During transmission to an external load : By measuring elastic deformation of a torque transmitting member : Using an electrical sensor : Inductance or reluctance sensor : Detecting magnetostrictive or magnetoelastic property : Magnetic sleeve or layer : Particular constituent :)

Patent 5531128: Capacitive transducer feedback-controlled by means of electrostatic force and method for controlling the profile of the transducing element
(MEASURING AND TESTING : DYNAMOMETERS : Responsive to force : By measuring elastic deformation : With compensation : Temperature : Electrical sensor)

Patent 5531129: Apparatus for extracting wear particles from used oil filters
(MEASURING AND TESTING : SAMPLER, SAMPLE HANDLING, ETC. : With constituent separation : Sieve, filter, or semipermeable membrane : Cleaning : Strain gauge)

Patent 5531130: Pipeline sampling enclosure
(MEASURING AND TESTING : SAMPLER, SAMPLE HANDLING, ETC. : Withdrawing through conduit or receptacle wall : Single valve unit)

Patent 5531131: Device for adjusting correction factor of a plunger lift pipet
(MEASURING AND TESTING : SAMPLER, SAMPLE HANDLING, ETC. : Capture device : Pipette or cannula : With suction applying and liquid discharge means : Piston and cylinder : Plural or adjustable limit stops : Piezoresistive)

Patent 5531132: Cam apparatus using an electromagnet and gears for decelerating a motor
(MACHINE ELEMENT OR MECHANISM : GEARING : Rotary bodies : Mutilated : Worm)

Patent 5531133: Shift lever assembly for transmission having turning inhibiting members
(MACHINE ELEMENT OR MECHANISM : CONTROL LEVER AND LINKAGE SYSTEMS : Multiple controlled elements : Transmission control : Control of plural mechanisms (e.g., control of transmission and control of 4 - wheel drive) : Multiple foot-operated controls)

Patent 5531134: Remote control assembly having rotatable end fitting
(MACHINE ELEMENT OR MECHANISM : CONTROL LEVER AND LINKAGE SYSTEMS : Hand operated : Flexible transmitter (e.g., Bowden cable) : And sheath support, connector, or anchor : Single rotatable lever (e.g., for bicycle brake or derailleur))

Patent 5531135: Pedal arrangement for a motor vehicle
(MACHINE ELEMENT OR MECHANISM : CONTROL LEVER AND LINKAGE SYSTEMS : Foot operated : Rotatable rod, shaft, or post)

Patent 5531136: Brake operating mechanism
(MACHINE ELEMENT OR MECHANISM : CONTROL LEVER AND LINKAGE SYSTEMS : Variable output force : Levers : Hand : Lazy tongs)

Patent 5531137: Cam follower assembly
(MACHINE ELEMENT OR MECHANISM : CONTROL LEVER AND LINKAGE SYSTEMS : Cams : Follower : Timer devices)

Patent 5531138: Window operator housing
(MACHINE ELEMENT OR MECHANISM : CONTROL LEVER AND LINKAGE SYSTEMS : Gear casings : Lubricated)

Patent 5531139: Unidirectional drive tool mechanism
(TOOLS : WRENCH, SCREWDRIVER, OR DRIVER THEREFOR : Handle clutched to head : Ball or roller wedge : Internal)

Patent 5531140: Coupling mechanism of socket wrench extension
(TOOLS : WRENCH, SCREWDRIVER, OR DRIVER THEREFOR : Handle or shank : Including socket and boss type connecting means : Universal joint)

Patent 5531141: Drain nut pliers
(TOOLS : TOOL JAW(S) POSITIONED BY RELATIVELY MOVABLE PLURAL HANDLES (E.G., PLIERS) : Jaw features : Nonplanar jaw face : Work conforming face : By detachment)

Patent 5531142: Device with automatic feeder for driving ribbon-mounted screws
(TOOLS : WRENCH, SCREWDRIVER, OR DRIVER THEREFOR : Machine : With feed or magazine means : Including driven, flexible, work supporting strip : Flexible shaft)

Patent 5531143: Screwdriver with replaceable bit assembly
(TOOLS : WRENCH, SCREWDRIVER, OR DRIVER THEREFOR : Having work engaging and force exerting portion inserted into cavity (e.g., allen wrench, screwdriver) : Having structure adapting portion or tool for separation : Reversing)

Patent 5531144: NC loader for NC machine tool
(TURNING : LATHE : With work feeder or remover : Bar feeder : Bar feeder)

Patent 5531145: Method for making IC card having severable mini chip card
(CUTTING : PROCESSES : With subsequent handling (i.e., of product) : By separating products from each other : By flexing around or by tool)

Patent 5531146: Tire shear
(CUTTING : WITH WORK IMMOBILIZER : Work-stop abutment : With means to adjust clamp position or stroke)

Patent 5531147: Saw guard
(CUTTING : ROTATABLE DISC TOOL PAIR OR TOOL AND CARRIER : With guard for tool : Work-support includes passageway for tool (e.g., slotted table))

Patent 5531148: Automatic set-up, collapsible electronic drum set
(MUSIC : INSTRUMENTS : Drums : Collapsible : With electric action)

Patent 5531149: Anti-car jacking device
(ORDNANCE : EXPLOSIVE OPERATED APPARATUS (E.G., EXPLOSIVE DOOR HINGE, TOOL EXPLOSIVELY ACTUATED, BAND RELEASE, EXPANSION OF TUBE, CABLE CUTTER, EXPLOSIVELY OPERATED SPLITTING WEDGES) : Rammers)

Patent 5531150: Lightweight gun systems
(ORDNANCE : BARRELS : Wound : Nonparallel bores)

Patent 5531151: Rodless cylinder
(EXPANSIBLE CHAMBER DEVICES : SEALED OPENING IN LONGITUDINAL WALL OF CHAMBER FOR RECEIVING WORKING MEMBER PORTION : Fluid spring)

Patent 5531152: Platen assembly for coffee maker using pre-dosaged coffee filter packets
(FOODS AND BEVERAGES: APPARATUS : BEVERAGE : Infusors : With infusive material feeding and/or discharging : Of infusive contact)

Patent 5531153: Bread baking apparatus
(FOODS AND BEVERAGES: APPARATUS : COOKING : Automatic control : Of heat and material : By time : Suspended)

Patent 5531154: Combination outdoor cooker and smoker
(FOODS AND BEVERAGES: APPARATUS : COOKING : Convertible : Of heat and material)

Patent 5531155: Cooking apparatus for two-sided cooking
(FOODS AND BEVERAGES: APPARATUS : COOKING : With material pressing means (e.g., ham boilers) : Condensing or self basting)

Patent 5531156: Automatic taco machine
(FOODS AND BEVERAGES: APPARATUS : EDIBLE LAMINATED PRODUCT MAKING APPARATUS : Foraminous support)

Patent 5531157: Sterilization and homogenization of fluid substances by high frequecy vibration
(FOODS AND BEVERAGES: APPARATUS : ELECTRIC, RADIANT OR VIBRATIONAL TREATING MEANS : Means feeding diverse center material)

Patent 5531158: Produce ripening apparatus and method
(FOODS AND BEVERAGES: APPARATUS : SUBJECTING FOOD TO AN ENCLOSED MODIFIED ATMOSPHERE : By actuated surface)

Patent 5531159: Pull-out drop down shelf structure
(HORIZONTALLY SUPPORTED PLANAR SURFACES : PLURAL RELATED HORIZONTAL SURFACES : Horizontally adjustable : With separable components)

Patent 5531160: Single-shaft four-point punch press
(PRESSES : RECIPROCATING PRESS CONSTRUCTION : Platen level compensating : Movable or removable box section)

Patent 5531161: Gravure coating feeder apparatus
(PRINTING : INTAGLIO : Rotary : Wiper : Scraper : Light)

Patent 5531162: Press plate registering method
(PRINTING : MULTICOLOR : Processes)

Patent 5531163: Flare pallet and process for making same
(AMMUNITION AND EXPLOSIVES : POWDER FORM : Composite type : Powder grain shape formed of fixed shape segments : Rocket motor type)

Patent 5531164: Select fire gun assembly and electronic module for underground jet perforating using resistive blasting caps
(AMMUNITION AND EXPLOSIVES : BLASTING : Patterned blasting : Borehole arrangement : Plural charges)

Patent 5531165: Structural member for use in a pallet or a shipping container
(HORIZONTALLY SUPPORTED PLANAR SURFACES : INDUSTRIAL PLATFORM : Formed from folded semirigid material (e.g., cardboard, etc.) : Support enters window recess)

Patent 5531166: Corrugated fiberboard riser
(HORIZONTALLY SUPPORTED PLANAR SURFACES : INDUSTRIAL PLATFORM : Formed from folded semirigid material (e.g., cardboard, etc.) : Support enters window recess)

Patent 5531167: Locking hanger bracket for use in a quick-change modular shelving system and shelving system employing such hanger bracket
(HORIZONTALLY SUPPORTED PLANAR SURFACES : PLURAL RELATED HORIZONTAL SURFACES : Vertically adjustable : Rotatable about vertical axis)

Patent 5531168: Adjustable table and shelf unit
(HORIZONTALLY SUPPORTED PLANAR SURFACES : PLURAL RELATED HORIZONTAL SURFACES : Vertically adjustable : Removably mountable in plural positions : Cantilever support : Responsive to end section movement)

Patent 5531169: Treatment of liquid waste material
(FURNACES : PROCESS : Incinerating refuse : Combustion product)

Patent 5531170: Compound curvature, domical structure for waste-to-energy facilities
(FURNACES : MISCELLANEOUS : Forge)

Patent 5531171: Liquid product device
(PLANTING : LIQUID OR GAS SOIL TREATMENT : Drilling machines (i.e., furrow opener) : Rotating or orbiting opener : Power operated)

Patent 5531172: Auxiliary bed device for overlock machine
(SEWING : ELEMENTS : Frames : Work supports : Single blade cutter)

Patent 5531173: Apparatus for positioning the foot portion of tubular knitted articles
(SEWING : SPECIAL MACHINES : Positionable work carrier : For stocking : Spiral pattern)

Patent 5531174: Sewing machine for sewing seams on a tubular workpiece
(SEWING : SPECIAL MACHINES : Having tube end tensioner : Fabric tuft)

 

Back to EveryPatent.com